Trestles needed

[Stef]

I need 2 trestles to fit the extra blades to the front and sommer do the saddle correction at the same time. Chassis is sitting 500mm of the ground so they must be on the tall side

Anyone that has a set I could borrow for 2-3 weekends?

[Mr_B]

Morning Stef, I've got the perfect set for you... only problem... they're in Cape Town!

[Gunta]

Stef you can buy a set from Adendorfs, they are cheap. If you are going to do the saddles you might as well do an axle move at the same time.

[bduk]

Hi Stef

As jy my die hoogtes gee wat jy nodig het sal ek van middag gaan kyk hoe lank is myne en as hulle reg is kan jy hulle leen

[Stef]

Hi Stef

As jy my die hoogtes gee wat jy nodig het sal ek van middag gaan kyk hoe lank is myne en as hulle reg is kan jy hulle leen

Barry,die chassis se laagste punt is so 500mm van die grond af so ek skat so 600- 800mm hoort te werk

Stef you can buy a set from Adendorfs, they are cheap. If you are going to do the saddles you might as well do an axle move at the same time.

More or less the plan, will drill the holes; Just don't have the moola right now to lengthen the prop. Was thinking of using spacers on both UJ's

[Gunta]

You can still do the move and you can do the prop later. Sagco's charged me R750 to lengthen the prop.

[bduk]

Oeps amper vergeet.

Stef lyk my myne sal so 600 van die grond af lig as dit jou sal help kan ek hulle vir jou leen.

[Stef]

Oeps amper vergeet.

Stef lyk my myne sal so 600 van die grond af lig as dit jou sal help kan ek hulle vir jou leen.

Dit kan werk...sal die naweek plan maak om by jou te kry, dankie