Hello all.
I have purchased a new set of LED fog lamps that I’m fitting into a custom bumper.
I want to use the current wiring and switch within the vehicle. Just makes sense.
My concern however is that the original wiring is a smaller gauge than what the new fog lights have.
I don’t know what the watts are on the new lights either.
Am I taking a chance using the existing wiring and switch?
Thanks.
New fog lamps and old wiring?
- Mud Dog
- Moderator
- Posts: 29859
- Joined: Tue Apr 29, 2008 2:18 am
- Town: East London
- Vehicle: '90 SFA Hilux DC 4X4, Full OME, 110mm lift. Brospeed branch, 50mm ss freeflow exhaust. 30 x 9.5 Discoverer S/T's on Viper mags. L/R tank. (AWOL) '98 LTD 2.4 SFA, dual battery system. Dobinson suspension, LR tanks, 31" BF mud's.
- Real Name: Andy
- Club VHF Licence: HC103
Re: New fog lamps and old wiring?
I think the LED's will draw less than the original incandescent lamps so you should be fine with the old wiring. If you're really concerned, use the original wiring to operate a relay and wire the lamps direct to the battery with an in-line fuse and heavier gauge wiring. That's the route I would go anyway because there is no significant voltage drop and the lamps will be a little brighter.
When your road comes to an end ...... you need a HILUX!.
Life is like a jar of Jalapeño peppers ... what you do today, might burn your ass tomorrow.
Don't take life too seriously ..... no-one gets out alive.
It's not about waiting for storms to pass. It's about learning to dance in the rain.
And be yourself ..... everyone else is taken!
Life is like a jar of Jalapeño peppers ... what you do today, might burn your ass tomorrow.
Don't take life too seriously ..... no-one gets out alive.
It's not about waiting for storms to pass. It's about learning to dance in the rain.
And be yourself ..... everyone else is taken!
- bullit
- Low Range 4WD
- Posts: 110
- Joined: Tue Sep 09, 2014 1:52 pm
- Town: Johannesberg
- Vehicle: Toyota Hilux
- Real Name: Ryan
Re: New fog lamps and old wiring?
Thanks.
I didn’t think of that actually.
Il have to figure the wiring out.
Thanks
I didn’t think of that actually.
Il have to figure the wiring out.
Thanks
-
- LR4WD, Lockers, Crawler Gears
- Posts: 1484
- Joined: Mon May 07, 2012 12:33 pm
- Town: Pretoria
- Vehicle: Toyota Hilux Dakar 2.8 GD-6 DC 4X4
- Real Name: Marnus
- Location: Pretoria Oos
- Contact:
Re: New fog lamps and old wiring?
What are the specs on the new spots?
- bullit
- Low Range 4WD
- Posts: 110
- Joined: Tue Sep 09, 2014 1:52 pm
- Town: Johannesberg
- Vehicle: Toyota Hilux
- Real Name: Ryan
Re: New fog lamps and old wiring?
I don’t know what the specs are for the new fog lights. That’s one of my issues.
- Mud Dog
- Moderator
- Posts: 29859
- Joined: Tue Apr 29, 2008 2:18 am
- Town: East London
- Vehicle: '90 SFA Hilux DC 4X4, Full OME, 110mm lift. Brospeed branch, 50mm ss freeflow exhaust. 30 x 9.5 Discoverer S/T's on Viper mags. L/R tank. (AWOL) '98 LTD 2.4 SFA, dual battery system. Dobinson suspension, LR tanks, 31" BF mud's.
- Real Name: Andy
- Club VHF Licence: HC103
Re: New fog lamps and old wiring?
Do they give the wattage?
When your road comes to an end ...... you need a HILUX!.
Life is like a jar of Jalapeño peppers ... what you do today, might burn your ass tomorrow.
Don't take life too seriously ..... no-one gets out alive.
It's not about waiting for storms to pass. It's about learning to dance in the rain.
And be yourself ..... everyone else is taken!
Life is like a jar of Jalapeño peppers ... what you do today, might burn your ass tomorrow.
Don't take life too seriously ..... no-one gets out alive.
It's not about waiting for storms to pass. It's about learning to dance in the rain.
And be yourself ..... everyone else is taken!
- bullit
- Low Range 4WD
- Posts: 110
- Joined: Tue Sep 09, 2014 1:52 pm
- Town: Johannesberg
- Vehicle: Toyota Hilux
- Real Name: Ryan
Re: New fog lamps and old wiring?
no nothing on the spotlight or the box they came in.
- Mud Dog
- Moderator
- Posts: 29859
- Joined: Tue Apr 29, 2008 2:18 am
- Town: East London
- Vehicle: '90 SFA Hilux DC 4X4, Full OME, 110mm lift. Brospeed branch, 50mm ss freeflow exhaust. 30 x 9.5 Discoverer S/T's on Viper mags. L/R tank. (AWOL) '98 LTD 2.4 SFA, dual battery system. Dobinson suspension, LR tanks, 31" BF mud's.
- Real Name: Andy
- Club VHF Licence: HC103
Re: New fog lamps and old wiring?
Try doing a search on the product and see what comes up. They would normally list specs and give either the wattage or the power consumption / draw.
When your road comes to an end ...... you need a HILUX!.
Life is like a jar of Jalapeño peppers ... what you do today, might burn your ass tomorrow.
Don't take life too seriously ..... no-one gets out alive.
It's not about waiting for storms to pass. It's about learning to dance in the rain.
And be yourself ..... everyone else is taken!
Life is like a jar of Jalapeño peppers ... what you do today, might burn your ass tomorrow.
Don't take life too seriously ..... no-one gets out alive.
It's not about waiting for storms to pass. It's about learning to dance in the rain.
And be yourself ..... everyone else is taken!
- bullit
- Low Range 4WD
- Posts: 110
- Joined: Tue Sep 09, 2014 1:52 pm
- Town: Johannesberg
- Vehicle: Toyota Hilux
- Real Name: Ryan
Re: New fog lamps and old wiring?
If I put my multimeter on 20A setting I read 0,71
VxA=W
Would these spots not be give or take 80 watts
I may be way off though I’m not an electrician.
VxA=W
Would these spots not be give or take 80 watts
I may be way off though I’m not an electrician.