Hi all,
Has anyone found a bolt on solution to recovery points on the front of their gen 6.
I don't have an aftermarket bumper and was wondering where and how you have attached recovery points to the front of the vehicle.
Photos would be a peach
Recovery points.
- MOFASA
- Monster Truck
- Posts: 3095
- Joined: Sun Mar 04, 2012 7:27 pm
- Town: Kempton Park
- Vehicle: 1998 JEEP XJ 4.0............ 4 inch lift.... more mods to follow............ Old vehicle was MOFASA
- Real Name: Johno
- Club VHF Licence: X119
- Location: Kempton Park
Re: Recovery points.
Front runner makes a recovery EYE which you can drill and bolt on...
If you dont come right we can help, give us a shout 012 752 8892 Opposite Lock Centurion
If you dont come right we can help, give us a shout 012 752 8892 Opposite Lock Centurion
Live Life in the FAST lane....
Forget the past, Embrace the FUTURE!!!!
To 4x4 or not to 4x4 thats the question....
IT'S A JEEP ..... You wouldn't understand....
[rimg=206x128]
Forget the past, Embrace the FUTURE!!!!
To 4x4 or not to 4x4 thats the question....
IT'S A JEEP ..... You wouldn't understand....
[rimg=206x128]
-
- LR 4WD Rear Locker
- Posts: 414
- Joined: Sun Jan 30, 2011 12:51 pm
- Town: Randburg
- Vehicle: Fortuner
- Real Name: Brian
Re: Recovery points.
Hi Johno,
I've looked at the problem a bit and it seems that any recovery point will be behind the Tupper bumper. Don't know how one gets past that ugly piece of plastic without cutting it away. Maybe not a bad idea.
I've looked at the problem a bit and it seems that any recovery point will be behind the Tupper bumper. Don't know how one gets past that ugly piece of plastic without cutting it away. Maybe not a bad idea.
- ChrisF
- Top Web Wheeler
- Posts: 8188
- Joined: Thu Sep 17, 2009 2:56 pm
- Town: inniedorp
- Vehicle: Toy
- Real Name: Chris
Re: Recovery points.
Racing snake wrote:Hi Johno,
I've looked at the problem a bit and it seems that any recovery point will be behind the Tupper bumper. Don't know how one gets past that ugly piece of plastic without cutting it away. Maybe not a bad idea.
for real hardcore recovery the point really should be straight in line with the chassis - which would require one to go through the bumper.
making a contraption that exits below the bumper will incurr excessive bending moments. In which case the factory fitted tie down points may just be better.
PS - have you looked at REAR recovery points ??? THIS is not standard on the Hilux, and a real pain ....
- MOFASA
- Monster Truck
- Posts: 3095
- Joined: Sun Mar 04, 2012 7:27 pm
- Town: Kempton Park
- Vehicle: 1998 JEEP XJ 4.0............ 4 inch lift.... more mods to follow............ Old vehicle was MOFASA
- Real Name: Johno
- Club VHF Licence: X119
- Location: Kempton Park
Re: Recovery points.
Chris you are correct in saying the bend or drop down recovery point is not the best but if you make up one with braces etc then they work well...
Remember 90% of the aftermarket replacement bumpers have recovery points and most of them are NOT inline with the chassis rail but they work just as well as ones bolted direct to the chassis.
Remember 90% of the aftermarket replacement bumpers have recovery points and most of them are NOT inline with the chassis rail but they work just as well as ones bolted direct to the chassis.
Live Life in the FAST lane....
Forget the past, Embrace the FUTURE!!!!
To 4x4 or not to 4x4 thats the question....
IT'S A JEEP ..... You wouldn't understand....
[rimg=206x128]
Forget the past, Embrace the FUTURE!!!!
To 4x4 or not to 4x4 thats the question....
IT'S A JEEP ..... You wouldn't understand....
[rimg=206x128]
- ChrisF
- Top Web Wheeler
- Posts: 8188
- Joined: Thu Sep 17, 2009 2:56 pm
- Town: inniedorp
- Vehicle: Toy
- Real Name: Chris
Re: Recovery points.
Johno it certainly is possible to make it up ..... but certainly not advisable.
If everything else is made strong enough the bolts holding that bracket suffers immense shear forces, over and above the force of the recovery .....
as for what some aftermarket manufacturers do .... uhm ja .... some certainly pay more attention to esthetics than practicality ..... but with the ordinary buyer buying with his eyes it aint no secret why ..... sadly we have no system in place to protect the buyer and to ensure equipment are "fit for purpose" ....
maar die is n groot blik waarin ons nou krap ....
If everything else is made strong enough the bolts holding that bracket suffers immense shear forces, over and above the force of the recovery .....
as for what some aftermarket manufacturers do .... uhm ja .... some certainly pay more attention to esthetics than practicality ..... but with the ordinary buyer buying with his eyes it aint no secret why ..... sadly we have no system in place to protect the buyer and to ensure equipment are "fit for purpose" ....
maar die is n groot blik waarin ons nou krap ....