Page 1 of 1
Headlight adjustment
Posted: Fri Oct 16, 2020 12:07 pm
by schalkjk
Hi all
Have anyone been able to adjust the Legend50 headlights hight? Its just that inch or so too low. At night it doesnt give sufficient light ahead. I know the headlights are auto leveling that will adjust the hight when you have a loaded bin. I just need that bit more even when unloaded.
It becomes an issue when cruising at speed and not being able to go to high beams.
guidance would be appreciated
Re: Headlight adjustment
Posted: Mon Nov 02, 2020 4:18 pm
by schalkjk
Asked my dealership if this can be adjusted like the older vehicles.
There are small little screws that will adjust the hight of the low beam.
Re: Headlight adjustment
Posted: Tue Nov 03, 2020 12:35 am
by Mud Dog
Hi Janus, All headlight must be adjustable both vertically and horizontally. It just gets confusing at times which screw does what.
Perhaps you can post a pic of the adjustment scews so that other users with the same model vehicle can benefit from your learning curve.
Re: Headlight adjustment
Posted: Mon Nov 09, 2020 10:32 am
by schalkjk
Sure no problem.
I can only show the vertical adjustments.
Its not a screw, but rather a gear. See attached photo and short video.
All you need is a philips head screw driver to be able to create a cog in the gear to adjust the lights up or down(Clockwise & Anti-Clockwise).
Unfortunately it seems I cant upload the short clip to show the action
Re: Headlight adjustment
Posted: Mon Nov 09, 2020 12:03 pm
by Mud Dog
Thanks Janus. Looks like they like using this idea in the later Toyota's ... My Rav has the same.
Re: Headlight adjustment
Posted: Mon Nov 09, 2020 1:05 pm
by schalkjk
Yes
Seems like its the LED auto leveling Headligts in the more recent Toyotas