how much lift needed
-
Kattie
- High Range 4WD
- Posts: 32
- Joined: Sat Oct 23, 2010 12:12 pm
- Town: walvis bay
- Vehicle: 4.0L hilux
- Real Name: Kattie
how much lift needed
I have a spare set BFG's mud terains 32x11.5 R 15 from my ex cruiser that i want to fit,will TJM suspension give enough lift or is a body lift needed,have any body done this or any advice appreciated.O it is the 4.0L outo DC
-
ismail
- LR 4WD Full Lockers
- Posts: 758
- Joined: Fri Jul 13, 2007 10:05 am
- Town: Cape Town
- Vehicle: Hilux '03 2700i SC 4x4
- Real Name: Ismail
- Location: Cape Town
Re: how much lift needed
spoke to Alan Venter on this a while back he said with the standard rims on and the suspension kit it should work.
'93 DC 2.2 4x4 33" BF KM2's 60mm lift, Fakawi Canvas Canopy. SOLD
'03 SC 2700i 4x4 32" BFG KM2, SAC stage 1, OME springs, Rancho 9000XL shocks, ARB, Escape Gear seatcovers - goes like a bomb!!!!!!!!!
I surf more than I work
'03 SC 2700i 4x4 32" BFG KM2, SAC stage 1, OME springs, Rancho 9000XL shocks, ARB, Escape Gear seatcovers - goes like a bomb!!!!!!!!!
I surf more than I work
-
Traveler
- Monster Truck
- Posts: 5311
- Joined: Fri Feb 26, 2010 7:11 am
- Town: Springs
- Vehicle: Pathfinder 2.5 LE AT
- Real Name: Heinrich
- Club VHF Licence: X81
- Location: Gauteng
- Contact:
Re: how much lift needed
Kattie, it will work with an OME Suspension lift. However under extreme flex the wheels will scuff.
Know what you don't know.
-
NicoP
- LR 4WD Rear Locker
- Posts: 357
- Joined: Tue Mar 23, 2010 8:05 am
- Town: Pretoria
- Vehicle: Hilux 2.7, SFA conversion, 33" Maxxis, 4.5 inch lift
- Real Name: Nico
- Contact:
Re: how much lift needed
Kattie
Speak to Uys. I know he got 32" on his fortuner. Maby just a spcer kit.
Speak to Uys. I know he got 32" on his fortuner. Maby just a spcer kit.
-
Kattie
- High Range 4WD
- Posts: 32
- Joined: Sat Oct 23, 2010 12:12 pm
- Town: walvis bay
- Vehicle: 4.0L hilux
- Real Name: Kattie
Re: how much lift needed
I was quoted 17-000 for OME there is no way im paying that i dont think its worth that amount of money thats why im going for TJM got a price of 10-000 for complete set,anyway thanks for the feedback everyone,where can i contact Uys
-
ismail
- LR 4WD Full Lockers
- Posts: 758
- Joined: Fri Jul 13, 2007 10:05 am
- Town: Cape Town
- Vehicle: Hilux '03 2700i SC 4x4
- Real Name: Ismail
- Location: Cape Town
Re: how much lift needed
You should try SA4x4 store also here on the forum his pricing is quite good
'93 DC 2.2 4x4 33" BF KM2's 60mm lift, Fakawi Canvas Canopy. SOLD
'03 SC 2700i 4x4 32" BFG KM2, SAC stage 1, OME springs, Rancho 9000XL shocks, ARB, Escape Gear seatcovers - goes like a bomb!!!!!!!!!
I surf more than I work
'03 SC 2700i 4x4 32" BFG KM2, SAC stage 1, OME springs, Rancho 9000XL shocks, ARB, Escape Gear seatcovers - goes like a bomb!!!!!!!!!
I surf more than I work
-
Animul
- LR 4WD Full Lockers
- Posts: 532
- Joined: Mon Aug 17, 2009 1:43 pm
- Town: Pretoria
- Vehicle: Previously V8 supercharged Monster truck, Jeep Wrangler Rubicon. Now looking for a vehicle to rejoin the community
- Real Name: Henry
- Location: Pretoria
- Contact:
Re: how much lift needed
Kattie, I can vouch for SA 4x4 store .... also busy with lift and his prices are much better than the ones I got so far ...
-
Kattie
- High Range 4WD
- Posts: 32
- Joined: Sat Oct 23, 2010 12:12 pm
- Town: walvis bay
- Vehicle: 4.0L hilux
- Real Name: Kattie
Re: how much lift needed
okay first upgrade underway will receive TJM suspension and TJM bullbar on thursday,jippeee can't wait,then installing it saturday,woohoo
-
Kattie
- High Range 4WD
- Posts: 32
- Joined: Sat Oct 23, 2010 12:12 pm
- Town: walvis bay
- Vehicle: 4.0L hilux
- Real Name: Kattie
Re: how much lift needed
Okay suspension is in and bullbar is on looking great like a 4x4 should.But here is the bad news,that 15'' wheels dont go over the calipers,the 16'' barely clears the calipers so the mud terains is for sale will look monday at prices for 16'' mud terains.Going to test the suspension tomorrow in the dunes
-
Kattie
- High Range 4WD
- Posts: 32
- Joined: Sat Oct 23, 2010 12:12 pm
- Town: walvis bay
- Vehicle: 4.0L hilux
- Real Name: Kattie
Re: how much lift needed
voor en na foto's
- CIMG2618.JPG (49.71 KiB) Viewed 2574 times
- CIMG2619.JPG (51.58 KiB) Viewed 2574 times
- CIMG2621.JPG (50.47 KiB) Viewed 2574 times
- CIMG2624.JPG (52.52 KiB) Viewed 2574 times
- CIMG2626.JPG (46.61 KiB) Viewed 2574 times
- Attachments
-
- CIMG2625.JPG (54 KiB) Viewed 2574 times
-
AM Racing
- LR4WD, Lockers, Crawler Gears
- Posts: 1214
- Joined: Thu Apr 01, 2010 9:30 am
- Town: East London
- Vehicle: Range Rover Classic V8
- Real Name: Dylan
- Location: East London
Re: how much lift needed
Hi. I fitted the BF Goodrich 235/85/16 to my SRX on stock suspension. It only touches on full compression on the inside of the chassis rail at full lock. Will be curing this with a 50mm lift. Great tyre, just a bit noisy on tar though. But hey, who gives a s@*&t! They eat mud for breakfast..... 
-
Foksie
- LR 4WD Rear Locker
- Posts: 271
- Joined: Sat Jul 10, 2010 2:34 am
- Town: Centurion
- Vehicle: Fortuner 4x4
- Real Name: Frank
Re: how much lift needed
Hi Kattie ,ek stel belang aan die 15'' mud terrain,wat soek jy vir hulle.
-
Kattie
- High Range 4WD
- Posts: 32
- Joined: Sat Oct 23, 2010 12:12 pm
- Town: walvis bay
- Vehicle: 4.0L hilux
- Real Name: Kattie
Re: how much lift needed
Jis Frank ek het 6000 betaal vir die bande en 4800 vir die rims.Die spaarwiel is splinter nuut,twee bande is nog baie goed ten minste 90%-95% en ander twee sal ek se so 85% ek sal later n foto opsit as jy wil kyk hoe dit lyk.Ander ding is vervoer jy gaan betaal dat dit bars vanaf walvis gouteng toe
-
Foksie
- LR 4WD Rear Locker
- Posts: 271
- Joined: Sat Jul 10, 2010 2:34 am
- Town: Centurion
- Vehicle: Fortuner 4x4
- Real Name: Frank
Re: how much lift needed
Sit maar n foto op laar ons sien