Hi guys
Long shot here, does anyone have a drawing for a 99 4X4 DC Hilux? Mine was damaged in an accident, and nothing available off the shelf, so need to get made up..
Thanks
99 Hilux Nudge Bar Drawing?
-
- High Range 2WD
- Posts: 10
- Joined: Fri Feb 17, 2023 7:13 pm
- Town: Camperdown
- Vehicle: 99 Hilux 4x4 DC
- Real Name: Roger
- niclemaitre
- LR 4WD Full Lockers
- Posts: 936
- Joined: Mon Jun 13, 2011 2:44 pm
- Town: Stellenbosch
- Vehicle: 99 IFS DC 4x4
- Real Name: Nic
- Location: Stellenbosch
Re: 99 Hilux Nudge Bar Drawing?
The nudge bar specifically? No.
I do have a drawing for a steel bumper for one if you want that
I do have a drawing for a steel bumper for one if you want that
Happy trails
Nic
SFA '97 DC - affirmatively shopped
SFA '87 DC "Rooies" - sold
IFS '99 DC "Benny"
Nic
SFA '97 DC - affirmatively shopped
SFA '87 DC "Rooies" - sold
IFS '99 DC "Benny"
- Family_Dog
- Moderator
- Posts: 12699
- Joined: Tue May 22, 2007 10:09 am
- Town: Klerksdorp
- Vehicle: Hilux DC SFA, Hilux 2.7 DC, Hilux 2.7 SC, Prado 95 VX
- Real Name: Eric
- Club VHF Licence: HC101
- Location: Klerksdorp, NW
- Contact:
Re: 99 Hilux Nudge Bar Drawing?
This is a much better idea than the Nudge Bar!
-F_D
-F_D
White Fang: 1999 2.7i DC Raider 4x4
Bull Dog: 1987 4Y-EFI 2.2 DC 4x4
Pra Dog: 1998 Prado VX 3.4
Hound Dog: 2000 2.7i SC 4x4
One Staffie, One Jack Russell, One Ring Neck Screecher, 17 Fish of questionable heritage
-
- High Range 2WD
- Posts: 10
- Joined: Fri Feb 17, 2023 7:13 pm
- Town: Camperdown
- Vehicle: 99 Hilux 4x4 DC
- Real Name: Roger
Re: 99 Hilux Nudge Bar Drawing?
That would be great, thanks Nic..
Any chance of sending by WhatsApp to 0823346123.. thanks a stack
Any chance of sending by WhatsApp to 0823346123.. thanks a stack
- niclemaitre
- LR 4WD Full Lockers
- Posts: 936
- Joined: Mon Jun 13, 2011 2:44 pm
- Town: Stellenbosch
- Vehicle: 99 IFS DC 4x4
- Real Name: Nic
- Location: Stellenbosch
Re: 99 Hilux Nudge Bar Drawing?
Hi there
I tried adding you on whatsapp, but it says that number isn't on whatsapp.
Anyway here is a link to the dxf files: https://drive.google.com/drive/folders/ ... sp=sharing
There are two support brackets out of 10 mm mild steel that form the main
attachment points of the bumper, and two right angle brackets also out of
10mm mild steel that bolt to the chassis rails. Check the slotted hole
spacing on the right angle brackets, I think I might have measured the hole
spacing on the bottom of the chassis rails incorrectly - I remember having
to widen the slots a bit.
Then the main bumper is 2 mm steel, so the bend radius is also 2 mm. There
is also a pattern for an internal bracket/stiffener - I ended up not
getting those cut, I made some to fit the bumper after I'd welded it up,
one in the centre and one on either end.
2 mm might seem a bit thin, but the bumper is very stiff because of all the
bends, I can stand on the corner with no deflection.
Details and pics here: https://www.4x4community.co.za/forum/sh ... 1997-2005)?
I tried adding you on whatsapp, but it says that number isn't on whatsapp.
Anyway here is a link to the dxf files: https://drive.google.com/drive/folders/ ... sp=sharing
There are two support brackets out of 10 mm mild steel that form the main
attachment points of the bumper, and two right angle brackets also out of
10mm mild steel that bolt to the chassis rails. Check the slotted hole
spacing on the right angle brackets, I think I might have measured the hole
spacing on the bottom of the chassis rails incorrectly - I remember having
to widen the slots a bit.
Then the main bumper is 2 mm steel, so the bend radius is also 2 mm. There
is also a pattern for an internal bracket/stiffener - I ended up not
getting those cut, I made some to fit the bumper after I'd welded it up,
one in the centre and one on either end.
2 mm might seem a bit thin, but the bumper is very stiff because of all the
bends, I can stand on the corner with no deflection.
Details and pics here: https://www.4x4community.co.za/forum/sh ... 1997-2005)?
Happy trails
Nic
SFA '97 DC - affirmatively shopped
SFA '87 DC "Rooies" - sold
IFS '99 DC "Benny"
Nic
SFA '97 DC - affirmatively shopped
SFA '87 DC "Rooies" - sold
IFS '99 DC "Benny"
-
- High Range 2WD
- Posts: 10
- Joined: Fri Feb 17, 2023 7:13 pm
- Town: Camperdown
- Vehicle: 99 Hilux 4x4 DC
- Real Name: Roger
Re: 99 Hilux Nudge Bar Drawing?
That;s great, thanks Nic, much appreciated.
Weird about my number, I definitely have Whatsapp..
Cheers Rog
Weird about my number, I definitely have Whatsapp..
Cheers Rog