SFA 32" OR 31" tyres
- GeorgeJvR
- Monster Truck
- Posts: 3286
- Joined: Thu Jul 16, 2009 2:55 pm
- Town: Louis Trichardt
- Vehicle: 2008 Prado 4.0 V6, 1989 SFA S/C 2.2 1998 SFA LTD 22RE
- Real Name: George
SFA 32" OR 31" tyres
So i have a set of 32" Khumo tyres on 10J rims laying around at home.
Considering, fitting them on the LTD.
Only mod currently is the EFI and the Old Man Emu suspention.
Is there a way to make the 32" fit without moving the axcel?
Thinking of lifting the body 50mm, will this be sufficient?
Considering, fitting them on the LTD.
Only mod currently is the EFI and the Old Man Emu suspention.
Is there a way to make the 32" fit without moving the axcel?
Thinking of lifting the body 50mm, will this be sufficient?
To Buy and sell a vehicle is my hobby
Make a deal that no one else thought possible is my aim
Kom wat wil ek bly 'n Bul!
Make a deal that no one else thought possible is my aim
Kom wat wil ek bly 'n Bul!
- Mud Dog
- Moderator
- Posts: 29858
- Joined: Tue Apr 29, 2008 2:18 am
- Town: East London
- Vehicle: '90 SFA Hilux DC 4X4, Full OME, 110mm lift. Brospeed branch, 50mm ss freeflow exhaust. 30 x 9.5 Discoverer S/T's on Viper mags. L/R tank. (AWOL) '98 LTD 2.4 SFA, dual battery system. Dobinson suspension, LR tanks, 31" BF mud's.
- Real Name: Andy
- Club VHF Licence: HC103
Re: SFA 32" OR 31" tyres
The rear isn't a problem but 32" will foul on the foot-wells in front. A body lift isn't going to solve the problem with articulation. Move the axle, much easier to do than a body lift anyway. Even with the OME lift, the front prop slip joint can easily handle the 30mm forward shift. You just have to bend an "S" shape with heat into the drag-link (remove the nylon cups and all the grease before heating). You also have to shorten the torque-rod. Can be done by cutting and welding but the better option is to buy or make an adjustable one.
When your road comes to an end ...... you need a HILUX!.
Life is like a jar of Jalapeño peppers ... what you do today, might burn your ass tomorrow.
Don't take life too seriously ..... no-one gets out alive.
It's not about waiting for storms to pass. It's about learning to dance in the rain.
And be yourself ..... everyone else is taken!
Life is like a jar of Jalapeño peppers ... what you do today, might burn your ass tomorrow.
Don't take life too seriously ..... no-one gets out alive.
It's not about waiting for storms to pass. It's about learning to dance in the rain.
And be yourself ..... everyone else is taken!
- Mud Dog
- Moderator
- Posts: 29858
- Joined: Tue Apr 29, 2008 2:18 am
- Town: East London
- Vehicle: '90 SFA Hilux DC 4X4, Full OME, 110mm lift. Brospeed branch, 50mm ss freeflow exhaust. 30 x 9.5 Discoverer S/T's on Viper mags. L/R tank. (AWOL) '98 LTD 2.4 SFA, dual battery system. Dobinson suspension, LR tanks, 31" BF mud's.
- Real Name: Andy
- Club VHF Licence: HC103
Re: SFA 32" OR 31" tyres
Personally I would stay with the 31's but do the shift anyway. I have 31's on my LTD and I've done rocky riverbeds where the other guys are running 33's ..... no problem, just have to choose your line carefully. I have scraped an axle or a diff here and there but it's slow deliberate driving, so no bashes. The 32's aren't going to help significantly over the 31's IMO.
An alternative would be to use the 31,s as daily runners and switch to the 32's for that extra ½" clearance when you're going to do some rougher stuff.
An alternative would be to use the 31,s as daily runners and switch to the 32's for that extra ½" clearance when you're going to do some rougher stuff.
When your road comes to an end ...... you need a HILUX!.
Life is like a jar of Jalapeño peppers ... what you do today, might burn your ass tomorrow.
Don't take life too seriously ..... no-one gets out alive.
It's not about waiting for storms to pass. It's about learning to dance in the rain.
And be yourself ..... everyone else is taken!
Life is like a jar of Jalapeño peppers ... what you do today, might burn your ass tomorrow.
Don't take life too seriously ..... no-one gets out alive.
It's not about waiting for storms to pass. It's about learning to dance in the rain.
And be yourself ..... everyone else is taken!
- GeorgeJvR
- Monster Truck
- Posts: 3286
- Joined: Thu Jul 16, 2009 2:55 pm
- Town: Louis Trichardt
- Vehicle: 2008 Prado 4.0 V6, 1989 SFA S/C 2.2 1998 SFA LTD 22RE
- Real Name: George
Re: SFA 32" OR 31" tyres
I was not to happy with the previous diff move i did on my Light blue SFA if it had a cross over steering then yes.the torqrod limits the articulation to much, and i do not like driving without it.
To Buy and sell a vehicle is my hobby
Make a deal that no one else thought possible is my aim
Kom wat wil ek bly 'n Bul!
Make a deal that no one else thought possible is my aim
Kom wat wil ek bly 'n Bul!
- Mud Dog
- Moderator
- Posts: 29858
- Joined: Tue Apr 29, 2008 2:18 am
- Town: East London
- Vehicle: '90 SFA Hilux DC 4X4, Full OME, 110mm lift. Brospeed branch, 50mm ss freeflow exhaust. 30 x 9.5 Discoverer S/T's on Viper mags. L/R tank. (AWOL) '98 LTD 2.4 SFA, dual battery system. Dobinson suspension, LR tanks, 31" BF mud's.
- Real Name: Andy
- Club VHF Licence: HC103
Re: SFA 32" OR 31" tyres
Having an adjustable torque-rod made up is not the end of the world. Get an engineering works to take 60mm out of the rod in the centre and put opposing threads onto each side of the split rod (one with LH thread and one with RH thread). They must also make up a 150mm long barrel nipple, also with opposing threads from each side that the split rod can turn into and be adjusted like a turn-buckle. Threads should be a tight fit so that it can't turn loose on it's own.
Can't understand why you were unhappy with your last axle shift .... one of the best mods you can do to the SFA and works fantastically if done right. It should not affect the handling of the vehicle at all. Seriously, it's the way to go and I would choose that option over a body lift every time.
My white SFA has had it done and torque rod is never removed. Yes, a torque rod limits articulation but as you say I would rather have it on than not with the standard push / pull steering. The thing is that it's better to have more articulation in the rear than the front anyway.
Can't understand why you were unhappy with your last axle shift .... one of the best mods you can do to the SFA and works fantastically if done right. It should not affect the handling of the vehicle at all. Seriously, it's the way to go and I would choose that option over a body lift every time.
My white SFA has had it done and torque rod is never removed. Yes, a torque rod limits articulation but as you say I would rather have it on than not with the standard push / pull steering. The thing is that it's better to have more articulation in the rear than the front anyway.
When your road comes to an end ...... you need a HILUX!.
Life is like a jar of Jalapeño peppers ... what you do today, might burn your ass tomorrow.
Don't take life too seriously ..... no-one gets out alive.
It's not about waiting for storms to pass. It's about learning to dance in the rain.
And be yourself ..... everyone else is taken!
Life is like a jar of Jalapeño peppers ... what you do today, might burn your ass tomorrow.
Don't take life too seriously ..... no-one gets out alive.
It's not about waiting for storms to pass. It's about learning to dance in the rain.
And be yourself ..... everyone else is taken!
- Tim86
- LR 4WD Rear Locker
- Posts: 299
- Joined: Tue Apr 12, 2016 10:33 pm
- Town: Cape Town
- Vehicle: Hilux
- Real Name: Tim
Re: SFA 32" OR 31" tyres
One of the things that appears to limit the articulation with the original torque rod is the rod rubbers which do not allow a lot of rotation about the fixing bolts.
I have replaced the ends with 'johnny joints' / rod ends. No torque rod causes a multitude of issues, even though sometimes they may not be blatantly obvious.
I have replaced the ends with 'johnny joints' / rod ends. No torque rod causes a multitude of issues, even though sometimes they may not be blatantly obvious.
- GeorgeJvR
- Monster Truck
- Posts: 3286
- Joined: Thu Jul 16, 2009 2:55 pm
- Town: Louis Trichardt
- Vehicle: 2008 Prado 4.0 V6, 1989 SFA S/C 2.2 1998 SFA LTD 22RE
- Real Name: George
Re: SFA 32" OR 31" tyres
Mmmm Maybe i should reconsider That Diff move
To Buy and sell a vehicle is my hobby
Make a deal that no one else thought possible is my aim
Kom wat wil ek bly 'n Bul!
Make a deal that no one else thought possible is my aim
Kom wat wil ek bly 'n Bul!
- GeorgeJvR
- Monster Truck
- Posts: 3286
- Joined: Thu Jul 16, 2009 2:55 pm
- Town: Louis Trichardt
- Vehicle: 2008 Prado 4.0 V6, 1989 SFA S/C 2.2 1998 SFA LTD 22RE
- Real Name: George
Re: SFA 32" OR 31" tyres
Time to do some reading, again.
To Buy and sell a vehicle is my hobby
Make a deal that no one else thought possible is my aim
Kom wat wil ek bly 'n Bul!
Make a deal that no one else thought possible is my aim
Kom wat wil ek bly 'n Bul!
- Tim86
- LR 4WD Rear Locker
- Posts: 299
- Joined: Tue Apr 12, 2016 10:33 pm
- Town: Cape Town
- Vehicle: Hilux
- Real Name: Tim
Re: SFA 32" OR 31" tyres
You will be able to fit 33's too one day then:) Don't forget extending of the brake lines, and I would recommend increasing the prop length - I added 45mm to mine, good for the OME lift and axle shift together.
- GeorgeJvR
- Monster Truck
- Posts: 3286
- Joined: Thu Jul 16, 2009 2:55 pm
- Town: Louis Trichardt
- Vehicle: 2008 Prado 4.0 V6, 1989 SFA S/C 2.2 1998 SFA LTD 22RE
- Real Name: George
Re: SFA 32" OR 31" tyres
To Buy and sell a vehicle is my hobby
Make a deal that no one else thought possible is my aim
Kom wat wil ek bly 'n Bul!
Make a deal that no one else thought possible is my aim
Kom wat wil ek bly 'n Bul!
- Mud Dog
- Moderator
- Posts: 29858
- Joined: Tue Apr 29, 2008 2:18 am
- Town: East London
- Vehicle: '90 SFA Hilux DC 4X4, Full OME, 110mm lift. Brospeed branch, 50mm ss freeflow exhaust. 30 x 9.5 Discoverer S/T's on Viper mags. L/R tank. (AWOL) '98 LTD 2.4 SFA, dual battery system. Dobinson suspension, LR tanks, 31" BF mud's.
- Real Name: Andy
- Club VHF Licence: HC103
Re: SFA 32" OR 31" tyres
If you have an adjustable torque rod made up you just use the original one if the rubbers are still good (most of the time they are). There is no need for the rose joint / Johnny joint in that case because the twist will be taken up in the "turn buckle". To stop it from turning out of adjustment you turn one side into the barrel nipple with thread tape so that it's much tighter than the other side which you leave without tape. That way it twists back and forth on one side thread only. I would even put a bit of grease or copper-slip on that untaped side so that the threads don't wear.
When your road comes to an end ...... you need a HILUX!.
Life is like a jar of Jalapeño peppers ... what you do today, might burn your ass tomorrow.
Don't take life too seriously ..... no-one gets out alive.
It's not about waiting for storms to pass. It's about learning to dance in the rain.
And be yourself ..... everyone else is taken!
Life is like a jar of Jalapeño peppers ... what you do today, might burn your ass tomorrow.
Don't take life too seriously ..... no-one gets out alive.
It's not about waiting for storms to pass. It's about learning to dance in the rain.
And be yourself ..... everyone else is taken!
- The Legend
- Monster Truck
- Posts: 3558
- Joined: Sun Jul 04, 2010 6:53 am
- Town: Kempton Park
- Vehicle: 1994 2.2 4y 4x4 D/C Toyota Hi-Lux
- Real Name: Dawie
- Club VHF Licence: X93-
Re: SFA 32" OR 31" tyres
George ek sal bly by 31.s.
“A BAD DAYS FISHING IS BETTER THAN A GOOD DAYS WORK”
“Do what you do so well, that the people that see you do it, will want to see you do it again,and will bring others to see you do it”
“Do what you do so well, that the people that see you do it, will want to see you do it again,and will bring others to see you do it”
- Family_Dog
- Moderator
- Posts: 12699
- Joined: Tue May 22, 2007 10:09 am
- Town: Klerksdorp
- Vehicle: Hilux DC SFA, Hilux 2.7 DC, Hilux 2.7 SC, Prado 95 VX
- Real Name: Eric
- Club VHF Licence: HC101
- Location: Klerksdorp, NW
- Contact:
Re: SFA 32" OR 31" tyres
Agree with staying with 31", less strain all round.
-F_D
-F_D
White Fang: 1999 2.7i DC Raider 4x4
Bull Dog: 1987 4Y-EFI 2.2 DC 4x4
Pra Dog: 1998 Prado VX 3.4
Hound Dog: 2000 2.7i SC 4x4
One Staffie, One Jack Russell, One Ring Neck Screecher, 17 Fish of questionable heritage
- Mud Dog
- Moderator
- Posts: 29858
- Joined: Tue Apr 29, 2008 2:18 am
- Town: East London
- Vehicle: '90 SFA Hilux DC 4X4, Full OME, 110mm lift. Brospeed branch, 50mm ss freeflow exhaust. 30 x 9.5 Discoverer S/T's on Viper mags. L/R tank. (AWOL) '98 LTD 2.4 SFA, dual battery system. Dobinson suspension, LR tanks, 31" BF mud's.
- Real Name: Andy
- Club VHF Licence: HC103
Re: SFA 32" OR 31" tyres
And the speedo reads true.Family_Dog wrote: ↑Tue Feb 04, 2020 8:05 pm Agree with staying with 31", less strain all round.
-F_D
When your road comes to an end ...... you need a HILUX!.
Life is like a jar of Jalapeño peppers ... what you do today, might burn your ass tomorrow.
Don't take life too seriously ..... no-one gets out alive.
It's not about waiting for storms to pass. It's about learning to dance in the rain.
And be yourself ..... everyone else is taken!
Life is like a jar of Jalapeño peppers ... what you do today, might burn your ass tomorrow.
Don't take life too seriously ..... no-one gets out alive.
It's not about waiting for storms to pass. It's about learning to dance in the rain.
And be yourself ..... everyone else is taken!
- Tim86
- LR 4WD Rear Locker
- Posts: 299
- Joined: Tue Apr 12, 2016 10:33 pm
- Town: Cape Town
- Vehicle: Hilux
- Real Name: Tim
Re: SFA 32" OR 31" tyres
The torque rod also partially reduces vertical movement of the axle.
The rubber bush is bonded onto the inner tube that has 'teeth' that bite into the brackets on the diff and the chassis when the bolts are tightened.
It is also bonded to its split outer casing and the whole bush assemblies are press fitted into the torque rod eyes at each end.
The friction between the split outer casing and the eye also prevents any movement between those surfaces (often they rust together).
When the axle moves up or down from the rod's neutral (set when the bolts are tightened) position, the rubber bushes go into twisting around the bolts. As there are two you need double the force/torque to twist them.
For a stock suspension with lesser vertical travel the torque requirement may be easily provided and the rod limitation not very noticeable.
With an OME 50mm lift suspension and axle shift the rod will have a more noticeable effect on the vertical travel as the available travel is now greater than stock, and the rod is shorter hence less of a lever arm about the bolts.
Rod ends will mostly mitigate the vertical limitation, as well as the horizontal (axle twist) limitation. You do however lose the dampening effect of the rubber, but I am unsure if this is noticeable.
Some guys simply swap the torque rod out for a tractor top link, which is often much cheaper than having machining work done.
That LTD looks stunning as it is though.
The rubber bush is bonded onto the inner tube that has 'teeth' that bite into the brackets on the diff and the chassis when the bolts are tightened.
It is also bonded to its split outer casing and the whole bush assemblies are press fitted into the torque rod eyes at each end.
The friction between the split outer casing and the eye also prevents any movement between those surfaces (often they rust together).
When the axle moves up or down from the rod's neutral (set when the bolts are tightened) position, the rubber bushes go into twisting around the bolts. As there are two you need double the force/torque to twist them.
For a stock suspension with lesser vertical travel the torque requirement may be easily provided and the rod limitation not very noticeable.
With an OME 50mm lift suspension and axle shift the rod will have a more noticeable effect on the vertical travel as the available travel is now greater than stock, and the rod is shorter hence less of a lever arm about the bolts.
Rod ends will mostly mitigate the vertical limitation, as well as the horizontal (axle twist) limitation. You do however lose the dampening effect of the rubber, but I am unsure if this is noticeable.
Some guys simply swap the torque rod out for a tractor top link, which is often much cheaper than having machining work done.
That LTD looks stunning as it is though.
- GeorgeJvR
- Monster Truck
- Posts: 3286
- Joined: Thu Jul 16, 2009 2:55 pm
- Town: Louis Trichardt
- Vehicle: 2008 Prado 4.0 V6, 1989 SFA S/C 2.2 1998 SFA LTD 22RE
- Real Name: George
Re: SFA 32" OR 31" tyres
This is what is holding me back... She is sitting on 116000Km
To Buy and sell a vehicle is my hobby
Make a deal that no one else thought possible is my aim
Kom wat wil ek bly 'n Bul!
Make a deal that no one else thought possible is my aim
Kom wat wil ek bly 'n Bul!
- GeorgeJvR
- Monster Truck
- Posts: 3286
- Joined: Thu Jul 16, 2009 2:55 pm
- Town: Louis Trichardt
- Vehicle: 2008 Prado 4.0 V6, 1989 SFA S/C 2.2 1998 SFA LTD 22RE
- Real Name: George
Re: SFA 32" OR 31" tyres
Maybe i should fit the 32" as is just to see what she looks like
To Buy and sell a vehicle is my hobby
Make a deal that no one else thought possible is my aim
Kom wat wil ek bly 'n Bul!
Make a deal that no one else thought possible is my aim
Kom wat wil ek bly 'n Bul!
- Bear
- Low Range 4WD
- Posts: 159
- Joined: Tue Nov 13, 2018 9:07 am
- Town: Johannesburg
- Vehicle: Toyota Hilux 2200 Raider D/Cab 4x4 - SFA
- Real Name: Ricky
Re: SFA 32" OR 31" tyres
When you fit them on let me know . I was also considering fitting 32''s when my 31''s are due for change. it just looks cool.
Travel is not really about leaving our homes, but leaving our habits.
Adventure tends to magnify all human emotions.
It's only in adventure that some people succeed in knowing themselves - in finding themselves.
Adventure tends to magnify all human emotions.
It's only in adventure that some people succeed in knowing themselves - in finding themselves.
- GeorgeJvR
- Monster Truck
- Posts: 3286
- Joined: Thu Jul 16, 2009 2:55 pm
- Town: Louis Trichardt
- Vehicle: 2008 Prado 4.0 V6, 1989 SFA S/C 2.2 1998 SFA LTD 22RE
- Real Name: George
Re: SFA 32" OR 31" tyres
To Buy and sell a vehicle is my hobby
Make a deal that no one else thought possible is my aim
Kom wat wil ek bly 'n Bul!
Make a deal that no one else thought possible is my aim
Kom wat wil ek bly 'n Bul!
-
- LR 4WD Rear Locker
- Posts: 277
- Joined: Sat Jan 24, 2009 2:25 pm
- Town: Harkerville WC
- Vehicle: 1990 Hilux 4Y
- Real Name: Peter
Re: SFA 32" OR 31" tyres
All this talk of 31's and 32's got me thinking. It sounds like the general consensus is that 31's are the best fit for a SFA. At the moment I'm using 30.5's, but will need new tyres quite soon, so my question is, how does the standard 4y cope with 31's? Will I notice a loss in power, higher fuel consumption or not really see any difference other than my speedo reading more accurately? As far as I'm aware 30.5 is what the bakkie came out with. Thanks for the trouble.
- Family_Dog
- Moderator
- Posts: 12699
- Joined: Tue May 22, 2007 10:09 am
- Town: Klerksdorp
- Vehicle: Hilux DC SFA, Hilux 2.7 DC, Hilux 2.7 SC, Prado 95 VX
- Real Name: Eric
- Club VHF Licence: HC101
- Location: Klerksdorp, NW
- Contact:
Re: SFA 32" OR 31" tyres
31" tyres are fine, were fitted as standard.
Read the PDF Road Test here:
viewtopic.php?f=44&t=2109
-F_D
Read the PDF Road Test here:
viewtopic.php?f=44&t=2109
-F_D
White Fang: 1999 2.7i DC Raider 4x4
Bull Dog: 1987 4Y-EFI 2.2 DC 4x4
Pra Dog: 1998 Prado VX 3.4
Hound Dog: 2000 2.7i SC 4x4
One Staffie, One Jack Russell, One Ring Neck Screecher, 17 Fish of questionable heritage
- Mud Dog
- Moderator
- Posts: 29858
- Joined: Tue Apr 29, 2008 2:18 am
- Town: East London
- Vehicle: '90 SFA Hilux DC 4X4, Full OME, 110mm lift. Brospeed branch, 50mm ss freeflow exhaust. 30 x 9.5 Discoverer S/T's on Viper mags. L/R tank. (AWOL) '98 LTD 2.4 SFA, dual battery system. Dobinson suspension, LR tanks, 31" BF mud's.
- Real Name: Andy
- Club VHF Licence: HC103
Re: SFA 32" OR 31" tyres
There shouldn't be much of a noticeable difference. You might find that it's a fraction shorter on legs when it comes to inclines on the open road. IIRC the original spare was a slightly smaller diameter than the 31's I had on the old silver SFA which was a 4Y. Could be that 31's became standard when the 22R motor replaced the 4Y.
When your road comes to an end ...... you need a HILUX!.
Life is like a jar of Jalapeño peppers ... what you do today, might burn your ass tomorrow.
Don't take life too seriously ..... no-one gets out alive.
It's not about waiting for storms to pass. It's about learning to dance in the rain.
And be yourself ..... everyone else is taken!
Life is like a jar of Jalapeño peppers ... what you do today, might burn your ass tomorrow.
Don't take life too seriously ..... no-one gets out alive.
It's not about waiting for storms to pass. It's about learning to dance in the rain.
And be yourself ..... everyone else is taken!
-
- LR 4WD Rear Locker
- Posts: 277
- Joined: Sat Jan 24, 2009 2:25 pm
- Town: Harkerville WC
- Vehicle: 1990 Hilux 4Y
- Real Name: Peter
Re: SFA 32" OR 31" tyres
Thanks, I think I'll try them when the time comes
- Bear
- Low Range 4WD
- Posts: 159
- Joined: Tue Nov 13, 2018 9:07 am
- Town: Johannesburg
- Vehicle: Toyota Hilux 2200 Raider D/Cab 4x4 - SFA
- Real Name: Ricky
Re: SFA 32" OR 31" tyres
The strange thing is my 94' - 4Y came with 31'' Yokohamas standard. The sticker on the side post states 30'' inch tyre inflation specs though.Mud Dog wrote: ↑Wed Feb 05, 2020 6:40 pm There shouldn't be much of a noticeable difference. You might find that it's a fraction shorter on legs when it comes to inclines on the open road. IIRC the original spare was a slightly smaller diameter than the 31's I had on the old silver SFA which was a 4Y. Could be that 31's became standard when the 22R motor replaced the 4Y.
I have the original spare 31-10.5 R15 Yokohama - The funny thing thing is the spare was never used before, still has those rubber hair on the thread surface of the tyre.
Travel is not really about leaving our homes, but leaving our habits.
Adventure tends to magnify all human emotions.
It's only in adventure that some people succeed in knowing themselves - in finding themselves.
Adventure tends to magnify all human emotions.
It's only in adventure that some people succeed in knowing themselves - in finding themselves.
- Mud Dog
- Moderator
- Posts: 29858
- Joined: Tue Apr 29, 2008 2:18 am
- Town: East London
- Vehicle: '90 SFA Hilux DC 4X4, Full OME, 110mm lift. Brospeed branch, 50mm ss freeflow exhaust. 30 x 9.5 Discoverer S/T's on Viper mags. L/R tank. (AWOL) '98 LTD 2.4 SFA, dual battery system. Dobinson suspension, LR tanks, 31" BF mud's.
- Real Name: Andy
- Club VHF Licence: HC103
Re: SFA 32" OR 31" tyres
I think the original tyre size for the split bead-lock rim was 30x16. When they started fitting the local Pro-White 15" rims they may have opted for the 31x15.
When your road comes to an end ...... you need a HILUX!.
Life is like a jar of Jalapeño peppers ... what you do today, might burn your ass tomorrow.
Don't take life too seriously ..... no-one gets out alive.
It's not about waiting for storms to pass. It's about learning to dance in the rain.
And be yourself ..... everyone else is taken!
Life is like a jar of Jalapeño peppers ... what you do today, might burn your ass tomorrow.
Don't take life too seriously ..... no-one gets out alive.
It's not about waiting for storms to pass. It's about learning to dance in the rain.
And be yourself ..... everyone else is taken!
- GeorgeJvR
- Monster Truck
- Posts: 3286
- Joined: Thu Jul 16, 2009 2:55 pm
- Town: Louis Trichardt
- Vehicle: 2008 Prado 4.0 V6, 1989 SFA S/C 2.2 1998 SFA LTD 22RE
- Real Name: George
Re: SFA 32" OR 31" tyres
Hi Guys i'm leaning towards selling my 32" Kumho KL71 and buying 31" MTs for the LTD.
Seem like a lot of work for very litle ekstra clearance
Seem like a lot of work for very litle ekstra clearance
To Buy and sell a vehicle is my hobby
Make a deal that no one else thought possible is my aim
Kom wat wil ek bly 'n Bul!
Make a deal that no one else thought possible is my aim
Kom wat wil ek bly 'n Bul!
- Mud Dog
- Moderator
- Posts: 29858
- Joined: Tue Apr 29, 2008 2:18 am
- Town: East London
- Vehicle: '90 SFA Hilux DC 4X4, Full OME, 110mm lift. Brospeed branch, 50mm ss freeflow exhaust. 30 x 9.5 Discoverer S/T's on Viper mags. L/R tank. (AWOL) '98 LTD 2.4 SFA, dual battery system. Dobinson suspension, LR tanks, 31" BF mud's.
- Real Name: Andy
- Club VHF Licence: HC103
Re: SFA 32" OR 31" tyres
Agreed.
When your road comes to an end ...... you need a HILUX!.
Life is like a jar of Jalapeño peppers ... what you do today, might burn your ass tomorrow.
Don't take life too seriously ..... no-one gets out alive.
It's not about waiting for storms to pass. It's about learning to dance in the rain.
And be yourself ..... everyone else is taken!
Life is like a jar of Jalapeño peppers ... what you do today, might burn your ass tomorrow.
Don't take life too seriously ..... no-one gets out alive.
It's not about waiting for storms to pass. It's about learning to dance in the rain.
And be yourself ..... everyone else is taken!
- Bear
- Low Range 4WD
- Posts: 159
- Joined: Tue Nov 13, 2018 9:07 am
- Town: Johannesburg
- Vehicle: Toyota Hilux 2200 Raider D/Cab 4x4 - SFA
- Real Name: Ricky
Re: SFA 32" OR 31" tyres
You have tried the 32’’. I was awaiting your reply on fitting them.
What clearance issues did you have?
Travel is not really about leaving our homes, but leaving our habits.
Adventure tends to magnify all human emotions.
It's only in adventure that some people succeed in knowing themselves - in finding themselves.
Adventure tends to magnify all human emotions.
It's only in adventure that some people succeed in knowing themselves - in finding themselves.
- GeorgeJvR
- Monster Truck
- Posts: 3286
- Joined: Thu Jul 16, 2009 2:55 pm
- Town: Louis Trichardt
- Vehicle: 2008 Prado 4.0 V6, 1989 SFA S/C 2.2 1998 SFA LTD 22RE
- Real Name: George
Re: SFA 32" OR 31" tyres
Hi Rick Sorry man never had the chance to fit them
To Buy and sell a vehicle is my hobby
Make a deal that no one else thought possible is my aim
Kom wat wil ek bly 'n Bul!
Make a deal that no one else thought possible is my aim
Kom wat wil ek bly 'n Bul!
- Rebel 4x4
- LR4WD, Lockers, Crawler Gears
- Posts: 1655
- Joined: Wed Mar 03, 2010 8:28 pm
- Town: Port Elizabeth
- Vehicle: 2020 Toyota Fortuner GD-6 4x4 Auto
- Real Name: Thomas
- Location: Port Elizabeth
Re: SFA 32" OR 31" tyres
An axle move is not required for 32". It is only for 33" and bigger.Mud Dog wrote: ↑Tue Feb 04, 2020 9:07 am The rear isn't a problem but 32" will foul on the foot-wells in front. A body lift isn't going to solve the problem with articulation. Move the axle, much easier to do than a body lift anyway. Even with the OME lift, the front prop slip joint can easily handle the 30mm forward shift. You just have to bend an "S" shape with heat into the drag-link (remove the nylon cups and all the grease before heating). You also have to shorten the torque-rod. Can be done by cutting and welding but the better option is to buy or make an adjustable one.
- Bear
- Low Range 4WD
- Posts: 159
- Joined: Tue Nov 13, 2018 9:07 am
- Town: Johannesburg
- Vehicle: Toyota Hilux 2200 Raider D/Cab 4x4 - SFA
- Real Name: Ricky
Re: SFA 32" OR 31" tyres
Hi RebelRebel 4x4 wrote: ↑Mon Feb 24, 2020 12:23 pmAn axle move is not required for 32". It is only for 33" and bigger.Mud Dog wrote: ↑Tue Feb 04, 2020 9:07 am The rear isn't a problem but 32" will foul on the foot-wells in front. A body lift isn't going to solve the problem with articulation. Move the axle, much easier to do than a body lift anyway. Even with the OME lift, the front prop slip joint can easily handle the 30mm forward shift. You just have to bend an "S" shape with heat into the drag-link (remove the nylon cups and all the grease before heating). You also have to shorten the torque-rod. Can be done by cutting and welding but the better option is to buy or make an adjustable one.
Know I see where you get the name from “REBEL”
This is an ongoing battle on all forums. Majority of the guys say 32's will touch on articulation and then one or two guys say it does not and the topic just ends there. If I am not mistaken the BF Goodrich 32's are actually 31.5”.
Kindly add more light on the subject as I am very keen on fitting 32's. The 285 wide just looks much cooler on 10jj wheels.
Travel is not really about leaving our homes, but leaving our habits.
Adventure tends to magnify all human emotions.
It's only in adventure that some people succeed in knowing themselves - in finding themselves.
Adventure tends to magnify all human emotions.
It's only in adventure that some people succeed in knowing themselves - in finding themselves.
- Rebel 4x4
- LR4WD, Lockers, Crawler Gears
- Posts: 1655
- Joined: Wed Mar 03, 2010 8:28 pm
- Town: Port Elizabeth
- Vehicle: 2020 Toyota Fortuner GD-6 4x4 Auto
- Real Name: Thomas
- Location: Port Elizabeth
Re: SFA 32" OR 31" tyres
I had 32" Good Year Wrangler MT's on my Hilux SFA. Drove them a long time till they were 'sat'. It never touched under articulation.Bear wrote: ↑Mon Feb 24, 2020 2:05 pmHi RebelRebel 4x4 wrote: ↑Mon Feb 24, 2020 12:23 pmAn axle move is not required for 32". It is only for 33" and bigger.Mud Dog wrote: ↑Tue Feb 04, 2020 9:07 am The rear isn't a problem but 32" will foul on the foot-wells in front. A body lift isn't going to solve the problem with articulation. Move the axle, much easier to do than a body lift anyway. Even with the OME lift, the front prop slip joint can easily handle the 30mm forward shift. You just have to bend an "S" shape with heat into the drag-link (remove the nylon cups and all the grease before heating). You also have to shorten the torque-rod. Can be done by cutting and welding but the better option is to buy or make an adjustable one.
Know I see where you get the name from “REBEL”
This is an ongoing battle on all forums. Majority of the guys say 32's will touch on articulation and then one or two guys say it does not and the topic just ends there. If I am not mistaken the BF Goodrich 32's are actually 31.5”.
Kindly add more light on the subject as I am very keen on fitting 32's. The 285 wide just looks much cooler on 10jj wheels.
- Bear
- Low Range 4WD
- Posts: 159
- Joined: Tue Nov 13, 2018 9:07 am
- Town: Johannesburg
- Vehicle: Toyota Hilux 2200 Raider D/Cab 4x4 - SFA
- Real Name: Ricky
Re: SFA 32" OR 31" tyres
Thanks bud.Rebel 4x4 wrote: ↑Mon Feb 24, 2020 3:50 pmI had 32" Good Year Wrangler MT's on my Hilux SFA. Drove them a long time till they were 'sat'. It never touched under articulation.Bear wrote: ↑Mon Feb 24, 2020 2:05 pmHi RebelRebel 4x4 wrote: ↑Mon Feb 24, 2020 12:23 pmAn axle move is not required for 32". It is only for 33" and bigger.Mud Dog wrote: ↑Tue Feb 04, 2020 9:07 am The rear isn't a problem but 32" will foul on the foot-wells in front. A body lift isn't going to solve the problem with articulation. Move the axle, much easier to do than a body lift anyway. Even with the OME lift, the front prop slip joint can easily handle the 30mm forward shift. You just have to bend an "S" shape with heat into the drag-link (remove the nylon cups and all the grease before heating). You also have to shorten the torque-rod. Can be done by cutting and welding but the better option is to buy or make an adjustable one.
Know I see where you get the name from “REBEL”
This is an ongoing battle on all forums. Majority of the guys say 32's will touch on articulation and then one or two guys say it does not and the topic just ends there. If I am not mistaken the BF Goodrich 32's are actually 31.5”.
Kindly add more light on the subject as I am very keen on fitting 32's. The 285 wide just looks much cooler on 10jj wheels.
IMG-20110806-00002.jpg
Travel is not really about leaving our homes, but leaving our habits.
Adventure tends to magnify all human emotions.
It's only in adventure that some people succeed in knowing themselves - in finding themselves.
Adventure tends to magnify all human emotions.
It's only in adventure that some people succeed in knowing themselves - in finding themselves.