Folks, I want to swop my Vigo (D/C V6 A/T) and (S/C 2.7 M/T) bodies and load bins over onto each others chassis'.
So the end result will be a Vigo (S/C V6 A/T) and (D/C 2.7 M/T).
Given that the chassis, motor, wiring and drivetrains will remain with each motor - will the bodies fit onto each others chassis, or are there chassis mods (like body mount points) to be done?
Other than the licensing issues (where a S/C is now a D/C and vice versa) - are there any other considerations?
Vigo S/C vs D/C chassis differences
- Mark Trollope
- High Range 4WD
- Posts: 33
- Joined: Wed Jan 20, 2010 12:38 pm
- Town: Greenstone
- Vehicle: Prado 120 VX, Hilux Vigo 2.7
- Real Name: Mark
- Location: Greenstone Hill
- Contact:
- ismail
- LR 4WD Full Lockers
- Posts: 758
- Joined: Fri Jul 13, 2007 10:05 am
- Town: Cape Town
- Vehicle: Hilux '03 2700i SC 4x4
- Real Name: Ismail
- Location: Cape Town
Re: Vigo S/C vs D/C chassis differences
nice a single cab V6........
maybe try and play with toyodiy if the part numbers of the chassis are the same,
maybe try and play with toyodiy if the part numbers of the chassis are the same,
'93 DC 2.2 4x4 33" BF KM2's 60mm lift, Fakawi Canvas Canopy. SOLD
'03 SC 2700i 4x4 32" BFG KM2, SAC stage 1, OME springs, Rancho 9000XL shocks, ARB, Escape Gear seatcovers - goes like a bomb!!!!!!!!!
I surf more than I work
'03 SC 2700i 4x4 32" BFG KM2, SAC stage 1, OME springs, Rancho 9000XL shocks, ARB, Escape Gear seatcovers - goes like a bomb!!!!!!!!!
I surf more than I work