Free flow for KZTE

[Menthis]

I would like to have a free flow fitted on my KZTE
has anyone done this recently done this?
Can anyone please let me know where the best place is to have this done at a good price and good quality?
Thanks

[vanthev8man]

theo,

don't know where in your area(i am from the good old wc),but it is deffinitly worth the bucks!

any diesel turbo will benefit by doing this.

throw out all the silencers and just fit one small one and at least 63mm pipe right through.

[Menthis]

hi van

im in joburg

thanks for the advice!

[Menthis]

van

do i have to do branches too?

[grobbepj]

Had mine done via steves auto clinic. Very happy and they were on the cheaper options. Probably the best SAC is in centurion... Not too far from you.

[grobbepj]

van

do i have to do branches too?

I did not do the branches. Was advised that the kzte branches is very much adequate as is. 65mm pipe from just after the branches to the back.

[JohanW]

Did a powerflow free flow exhaust upgrade on last week Friday. Turbo spins up much sooner, more power from 1500 rpm onwards. From the turbo to the flex joint I have a 61mm pipe. Seems it came out standard with that. From the flex joint to the back I now have a single powerflow box and a pipe going out just before the rear bumper on passenger side. Total cost was R1600 normal steel. Diesel exhausts don't rust. The diesel soot prevents rust. So stainless steel is an overkill. I took the standard exhaust off in perfect condition. It was 13 years old.

Edit : it's a 63mm system from the flex joint.

[Menthis]

Dankie julle

dit het baie gehelp

[Eyeman]

Where can I have this done in the Jeffreys Bay area? Otherwise in PE?

[pietdevs]

I'm in Mosselbay and had my free flow done here - excellent job for under R1000. Definitely worth while! Maybe you can drive thru from Jbay and have it done here?

[Eyeman]

Thanks, but PE is much closer to Sharks country - have to avoid WeePee land for now!!
Can this be done by a Supa-Quick?

[pietdevs]

I suppose they have the tools?

[Menthis]

Piet where in Mosselbay did you have this done?
I'm visiting my parents there in Dec and should maybe have it done while I'm there

also could you see the improvement on fuel consumption and power?

[louis fourie]

Hoe weet ek dat ek nie al reeds 'n free flow box op het nie? Kan iemand dalk 'n foto opsit van sy free flow box.

Dankie...wag vir 'n fotie

Nog 'n vraag. Waar anders kan ek 'n free flow laat installeer behalwe Steves. Het klaar 'n prys van hulle.

[4x4Maniac]

Hi Louis, ek het by Noise Boys sommer gehoor en hulle vra so R2600 vir n free flow box en pyp in stainless steel.





Sent from my couch using a potato.

[louis fourie]

Thanks Werner. Ek sal hulle ook 'n luitjie gee

Sent from my GT-I9300 using Tapatalk

[Menthis]

Louis

ek het nog 'n plek se nommer gekry by een van die Toyota ouens to ek my bakkie daar gehaad het
hulle vra R2000 stainless voor vat

TNT exhaust 011 822 2121 jy kan met Tom praat

[Pote]

Hoe weet ek dat ek nie al reeds 'n free flow box op het nie? Kan iemand dalk 'n foto opsit van sy free flow box.

Dankie...wag vir 'n fotie

Nog 'n vraag. Waar anders kan ek 'n free flow laat installeer behalwe Steves. Het klaar 'n prys van hulle.

Jy kan ook by die manne van De-Graaf probeer. Die een in VD Hoff Road het ek al 'n paar van my karre na toe gevat en hulle werk is baie goed...

[Menthis]

pote

jy vir ons 'n kontak nommer?

[Thabogrobler]

Google Theo, google!

[louis fourie]

Watse verskil in brandstof verbruik en krag maak die freeflow?

Sent from my GT-I9300 using Tapatalk

[Thabogrobler]

Watse verskil in brandstof verbruik en krag maak die freeflow?

Sent from my GT-I9300 using Tapatalk

Marginaal!

MAAR die EGT's behoort heelwat laer te wees.