Body Spacers

[richardo1]

Hi
ek wil net biekie hoor wie het al alluminium body spacers laat draai ?

waar en hoeveel was die skade ?

julle insette sal waardeur word

[WayneSchalk]

http://www.4x4direct.co.za/shop/suspens ... -lift-c-7/

[Pote]

Hi Richard

Dit is nie nodig om Aluminium te gebruik nie.
By Maizie's Plastic kan jy net Ø65 PEP materiaal koop. Ek het so 3 jaar trug R600 rand betaal vir 1.5m.
Het dit laat draai by 'n engineering shop vir R450.

Al die ander boute, clamps en fittings het my nog so R550 gekos en dit self in gesit.

Hoop die informasie help...

[Donkey]

Richard here's a few lessons learnt from my 40mm body lift, the fuel pipe to the tank will also need to be lengthened, the rear spare wheel mechanism that lifts the spare wheel under the bin, that hole will be mis-aligned after the lift

[Thunder02]

Richard here's a few lessons learnt from my 40mm body lift, the fuel pipe to the tank will also need to be lengthened, the rear spare wheel mechanism that lifts the spare wheel under the bin, that hole will be mis-aligned after the lift

Thanks for the hints,about to start mine,front bumper also needs to be lifted.

[richardo1]

haha thanx for the info everybody

[Donkey]

Richard here's a few lessons learnt from my 40mm body lift, the fuel pipe to the tank will also need to be lengthened, the rear spare wheel mechanism that lifts the spare wheel under the bin, that hole will be mis-aligned after the lift

Thanks for the hints,about to start mine,front bumper also needs to be lifted.

yes,sir.

[Thunder02]

Richard here's a few lessons learnt from my 40mm body lift, the fuel pipe to the tank will also need to be lengthened, the rear spare wheel mechanism that lifts the spare wheel under the bin, that hole will be mis-aligned after the lift

Thanks for the hints,about to start mine,front bumper also needs to be lifted.

yes,sir.

Thankyou sir.

[Ali3n]

Richard here's a few lessons learnt from my 40mm body lift, the fuel pipe to the tank will also need to be lengthened, the rear spare wheel mechanism that lifts the spare wheel under the bin, that hole will be mis-aligned after the lift

Thanks for the hints,about to start mine,front bumper also needs to be lifted.

yes,sir.

Thankyou sir.

Rear bumper too...

I even had to lengthen my steering column.

[richardo1]

Ek is besig om my eie bullbar en towbar te bou so dit gaan reg gebou word vir die bodylift

[Thunder02]

Ek is besig om my eie bullbar en towbar te bou so dit gaan reg gebou word vir die bodylift

Whatever the size spaces you put in is what size you have to lift the bumpers.
I would recommend making new brackets .