Hilux 4x4 Forum

I'll post on this thread as I go along, there is the usual things to do on the van and as I pulled out most of my kit from the D4D I can get started this weekend.

Here is the to do list:

1.Fit the second battery and CTEC Dual, the bracket is in place under the bonnet
2.Fit the various 12v DC plugs for fridge, lights, solar panel and 3rd battery at the back
3.This goes hand in hand with the plugs, I am not keen on making holes in the vinyl side panels, so I am thinking of making aluminum ones. I will store the vinyl panels. But will see how it goes.
4.Drawer system. I am not forking out R9k for a drawer system, the plan is to buy the drawers loose from Frontrunner, build an aluminum frame with connect it blocks (got the material) and use 1meter sliders for the 2 drawers and fridge on top
5.Roof rack and rooftop tent


That is what needs to be done with a couple of small jobs for Gerber Canvas


Got to get it done, I really would like to do Kgalagadi soon

Mooi Wayne..........welcome to the 4.2 section of the club.

I'll do my side really fast, if I may go with

WayneSchalk wrote:I'll post on this thread as I go along, there is the usual things to do on the van and as I pulled out most of my kit from the D4D I can get started this weekend.

Here is the to do list:

1.Fit the second battery and CTEC Dual, the bracket is in place under the bonnet
2.Fit the various 12v DC plugs for fridge, lights, solar panel and 3rd battery at the back
3.This goes hand in hand with the plugs, I am not keen on making holes in the vinyl side panels, so I am thinking of making aluminum ones. I will store the vinyl panels. But will see how it goes.
4.Drawer system. I am not forking out R9k for a drawer system, the plan is to buy the drawers loose from Frontrunner, build an aluminum frame with connect it blocks (got the material) and use 1meter sliders for the 2 drawers and fridge on top
5.Roof rack and rooftop tent


That is what needs to be done with a couple of small jobs for Gerber Canvas


Got to get it done, I really would like to do Kgalagadi soon

Klink my jy speel LEKKER :)


1, 2) vat jou tyd, en onthou die fuses ...

3) begin met n GAT in die fender vir die snorkel ... daarna raak dit makliker om nog gate te boor ....

JA, ek hou ook nie daarvan om gate te boor in my wa nie !!


4) ONE meter sliders ..... have you got space for 1,2m sliders ..... free, gratis en forniet .... (jy moet net vervoer reel van die Kaap tot Jo-ies ... SEKER hier is n member of drie wat kan help)

Dit het diens gedoen in Elders 1 ... word nie nou gebruik nie ....

5) gaan leen solank n roof rack by n taxi ...

ChrisF wrote:

WayneSchalk wrote:I'll post on this thread as I go along, there is the usual things to do on the van and as I pulled out most of my kit from the D4D I can get started this weekend.

Here is the to do list:

1.Fit the second battery and CTEC Dual, the bracket is in place under the bonnet
2.Fit the various 12v DC plugs for fridge, lights, solar panel and 3rd battery at the back
3.This goes hand in hand with the plugs, I am not keen on making holes in the vinyl side panels, so I am thinking of making aluminum ones. I will store the vinyl panels. But will see how it goes.
4.Drawer system. I am not forking out R9k for a drawer system, the plan is to buy the drawers loose from Frontrunner, build an aluminum frame with connect it blocks (got the material) and use 1meter sliders for the 2 drawers and fridge on top
5.Roof rack and rooftop tent


That is what needs to be done with a couple of small jobs for Gerber Canvas


Got to get it done, I really would like to do Kgalagadi soon

Klink my jy speel LEKKER :)


1, 2) vat jou tyd, en onthou die fuses ...

3) begin met n GAT in die fender vir die snorkel ... daarna raak dit makliker om nog gate te boor ....

JA, ek hou ook nie daarvan om gate te boor in my wa nie !!


4) ONE meter sliders ..... have you got space for 1,2m sliders ..... free, gratis en forniet .... (jy moet net vervoer reel van die Kaap tot Jo-ies ... SEKER hier is n member of drie wat kan help)

Dit het diens gedoen in Elders 1 ... word nie nou gebruik nie ....

5) gaan leen solank n roof rack by n taxi ...

Waar kan ek daai Slides laai? en wat skuld ek jou, ek stuur my courier

Thunder02 wrote:I'll do my side really fast, if I may go with

I would prefer a convoy, if you are keen we can plan a trip

zepplin wrote:Mooi Wayne..........welcome to the 4.2 section of the club.

Thanx Steve, die lorrie ry vir my baie leker

WayneSchalk wrote:

Thunder02 wrote:I'll do my side really fast, if I may go with

I would prefer a convoy, if you are keen we can plan a trip

Just got back from a trip, planning to go visit the Rhinos over easter

WayneSchalk wrote:

Waar kan ek daai Slides laai? en wat skuld ek jou, ek stuur my courier

net bly die slides kry nou weer n goeie huis ....


dink net hoe bly is daai slides .... van n Hilux na n CRUISER ....

Ok things are coming together, I got the 2 drawers from Frontrunner, R735 each.

I got slides, and alu for the frame with connect it blocks, so just need a plywood sheet and speaker box material to cover

will start playing tonight

WayneSchalk wrote:Ok things are coming together, I got the 2 drawers from Frontrunner, R735 each.

I got slides, and alu for the frame with connect it blocks, so just need a plywood sheet and speaker box material to cover

will start playing tonight

Pics

Thunder02 wrote:

WayneSchalk wrote:Ok things are coming together, I got the 2 drawers from Frontrunner, R735 each.

I got slides, and alu for the frame with connect it blocks, so just need a plywood sheet and speaker box material to cover

will start playing tonight

Pics

She is very HOT and bright outside, so the pick is not so good.

That's going to match great with the interior of the Bruiser

Here is the progress

1meter slides just fits in the bsck, tonight ill get the slides in and the boxes on the slides, and rivet the whole thing together. Then over the weekend ill get the plywood and material. If time alows me ill start with the alu side panels also.

Sent from my GT-I9300 using Tapatalk

Daar is hy, het die naweek gou die laai klaar gemaak, ek moet nou net 'n slide maak vir die yskas.

Looks very neat....

Second that,neat job

Very nice Wayne! Hoe het jy die raam vasgesit? of staan hy en die laaie als net los op die mat?

BAIE smart daarso Wayne.

Whiteley wrote:Very nice Wayne! Hoe het jy die raam vasgesit? of staan hy en die laaie als net los op die mat?

Hy is los vir nou, ek sal tie down ringe op sit en op die tie downs vas strap, wil nie gate maak nie

Klink goed. Post asb foto's van dit as jy klaar is. Jyt 'n helse netjiese job gedoen, ek wil ook so aluminium boks bou vir my bakkie agter, maar wil ook nie nog gate maak nie, daarom stalk ek jou vordering..

het jy darem nog nut vir die 1,2m slides ... :)


jou werk lyk NETJIES !!

ChrisF wrote:het jy darem nog nut vir die 1,2m slides ... :)


jou werk lyk NETJIES !!

EK het 'n plan ja Baie dankie

Looking very spliff boet

Two rastafarians walk into a bank, anyone know what they intend to do?

Daai lyk baie netjies

the next step is getting the NL 50lt weekender on a slide, but SWAMBO is a shorty and if the fridge is to high it will be a good excuse for SWAMBO not to get me a beer, so I am going to do a tilting slide.

Someting like this, please share if you have a better idea

Get her a three step ladder, much cheaper

Speak to Uys - he did a "drop-slide" ....

Suspension upgrade for her, 3 and 4 inches, works on any car.

I vote the second pic Can also match colour to your Cruiser

Donkey wrote:Suspension upgrade for her, 3 and 4 inches, works on any car.

Hahahaha

I am going to drop the idea. and stick to KISS. I got my slides, base plate for the NL and if all goes well I'll get the alu angle iron I ordered. So I would like to put it together tonight as I need it for the weekend out to de Wildt, will keep you posted.

gister GESTAAN in die verkeer vir omtrent so 20 minute - reg agter so Cruiser - SPLINTER NUUT


deksilse mooi wa !!

ChrisF wrote:gister GESTAAN in die verkeer vir omtrent so 20 minute - reg agter so Cruiser - SPLINTER NUUT


deksilse mooi wa !!

EK hou nog altyd van hulle, my pa het altyd gese as ons een sien "eendag as ek groot is"

Nou as ek 'n biertjie by sy huis gaan drink kyk hy die lorrie net so uit

My Alu angle iron het gekom, so vanaand bou ek gou die slide

Lekker man, geniet dit

WayneSchalk wrote:My Alu angle iron het gekom, so vanaand bou ek gou die slide

What happened to the trailer

Thunder02 wrote:

WayneSchalk wrote:My Alu angle iron het gekom, so vanaand bou ek gou die slide

What happened to the trailer

It is coming along......

But you know how it goes

WayneSchalk wrote:

Thunder02 wrote:

WayneSchalk wrote:My Alu angle iron het gekom, so vanaand bou ek gou die slide

What happened to the trailer

It is coming along......

But you know how it goes

But always gets done before the next trip

OK the fridge slide is just about done, just need to round off and get the latch

What happened to the tilt action, or did you go with Donkey's idea

Thunder02 wrote:What happened to the tilt action, or did you go with Donkey's idea

No there is a nice step on the bumper for Angela, I'd rather keep it simple.

WayneSchalk wrote:

Thunder02 wrote:What happened to the tilt action, or did you go with Donkey's idea

No there is a nice step on the bumper for Angela, I'd rather keep it simple.

Don't want to confuse them while fetching the beer

Ok Wayne ek is happy met hom so.Hoeveel Windhoek lagers soek jy vir die drawer?

Wayne het jy toe die drawer vasgemaak met die tie down ringe soos jy gese het? Dit lyk my jys 'n baie handige ou.

Ja hy is nou vas met die agterste ringe. Ek sal voor ook doen.

Sent from my GT-I9300 using Tapatalk

Sal jy kan fotos neem van die ringe sodat hierdie onkundige ou in die boendoes kan sien hoe die experts dit doen? Ek wil ook nie gate boor nie

Lollie wrote:Ok Wayne ek is happy met hom so.Hoeveel Windhoek lagers soek jy vir die drawer?

It's usually a case

Baie netjies Wayne.

Whiteley wrote:Sal jy kan fotos neem van die ringe sodat hierdie onkundige ou in die boendoes kan sien hoe die experts dit doen? Ek wil ook nie gate boor nie

Ek sal so maak

Die naweek wil ek graag die panels vervang met alu, en die plugs insit met die cables vir die ctek

Waar kry julle die angle aluminium? Geen van die plekke in Kathu kan my help nie, sal dit moet invoer van Gautengeleng af..

Whiteley wrote:Waar kry julle die angle aluminium? Geen van die plekke in Kathu kan my help nie, sal dit moet invoer van Gautengeleng af..

http://www.aluminiumalloys.co.za

Thanks!

Jis time to update this tread.

So from my original to-do list this is where I am at.

1.Fit the second battery and CTEC Dual - Done, but I fitted the NL split system, not too happy, might go CTEC after all.
2.Fit the various 12v DC plugs for fridge, lights, solar panel. - Got the roofrack on so will store the solar panel under roofrack.
3.This goes hand in hand with the plugs, I am not keen on making holes in the vinyl side panels, so I am thinking of making aluminum ones. I will store the vinyl panels. But will see how it goes.
4.Drawer system. I am not forking out R9k for a drawer system, the plan is to buy the drawers loose from Frontrunner, build an aluminum frame with connect it blocks (got the material) and use 1meter sliders for the 2 drawers and fridge on top - DONE but I will be making some changes to the fridge slide, its a bit noisy with the NL bracket for the fridge, I'm going to pull that out and use tie downs.
5.Roof rack and rooftop tent - Roofrack is on now I am waiting on the tent.

I would like to get all this done way before December, but things are very expensive. In between all this I have to keep SWAMBO happy and I have the trailer :wth:

So most of the things to come will go in the roofrack; gas bottle, water tank, 2 x jerry can, recovery crate, sand tracks, RTT, awning, lights, shovel......

here is where I am at now, still have to fit the water tank, recovery crate and gas bottle. The rest I have to buy.

Ek het die naweek nog so paar dinge op die RR gesit. Wag nou net vir die awning, tent en tafel

Whiteley wrote: ↑Wed Feb 19, 2014 9:12 am Waar kry julle die angle aluminium? Geen van die plekke in Kathu kan my help nie, sal dit moet invoer van Gautengeleng af..

Hi Whiteley and co,

Just want to add you can purchase aluminium with fabrication services from Aluminium Trading in Edenvale. They help many travellers this time of year with caravan mods and repairs as well as custom canopy fittings and fabrications. Check them out here: https://www.aluminiumtrading.co.za

Otherwise if you are closer to the Natal region I have heard (no experience) there is a company called Aluminium Doctor that is very good to.