Heavy duty load bin slide.

[WESKUSKLONG]

I had some spare time and decide it time to built the long awaiting slide.

[Jaans]

Looks good.

[MOFASA]

Look good so far.....
What bearings are you using.....
ID, OD and thickness please

[Masekind]

Baie mooi

[Thunder02]

Looks great

[WESKUSKLONG]

Look good so far.....
What bearings are you using.....
ID, OD and thickness please

Thanks
ID=8mm
OD=22mm
Thickness 7mm

[MOFASA]

Look good so far.....
What bearings are you using.....
ID, OD and thickness please

Thanks
ID=8mm
OD=22mm
Thickness 7mm

I hope you used sealed bearings....

[WESKUSKLONG]

Look good so far.....
What bearings are you using.....
ID, OD and thickness please

Thanks
ID=8mm
OD=22mm
Thickness 7mm

I hope you used sealed bearings....

Yes

[Pjjvdm]

Rudi, very nicely done. What size angle iron did you use?

[WESKUSKLONG]

Rudi, very nicely done. What size angle iron did you use?

I had some plates bend instead of angle iron. 70mm x 3mm.

[Pjjvdm]

Rudi
Some more questions :
1 Is this the full width of the loadbin?
2 What is the thickness of the flatbar lip that is running between the bearings?
3 Assuming you used something like plywood inside the drawer?
4 Any idea of how much weight you can have on the end when extended, like a fridge?

[WESKUSKLONG]

Rudi
Some more questions :
1 Is this the full width of the loadbin? Yes between the wheel arches.
2 What is the thickness of the flatbar lip that is running between the bearings? I used a 19 mm x 19 mm tubing.
3 Assuming you used something like plywood inside the drawer? Yes I used 12mm ply wood.
4 Any idea of how much weight you can have on the end when extended, like a fridge?

I pack on there 2x 40L engels, gazebo ,gas cylinder and 4 x ammo boxes with no problems.

[Pjjvdm]

Baie dankie!