How to Get 1uzfe to start first time
-
- LR 4WD Full Lockers
- Posts: 601
- Joined: Thu Jan 24, 2008 10:31 pm
- Town: Gordons Bay
- Vehicle: 2011 Hilux DC 3.0 D4D
- Real Name: Luke
How to Get 1uzfe to start first time
So just wondering if you 1uz guys have had this problem. Regardless of whether my vehicle is hot or cold, i takes at least 4 or 5 turns to start. It's not bad, but i would like it to start first time like all the other Toyota's ive had. Do i need to connect the idle control valve up to the Spitronics? Anyway, help would be much appreciated.
With each replacement of parts, a car slowly becomes Chinese.
- TOYOTA 4YEFI
- Low Range 4WD
- Posts: 222
- Joined: Thu Sep 10, 2009 7:26 am
- Town: Pretoria
- Vehicle: Land Cruisr 80
- Real Name: Juan
Re: How to Get 1uzfe to start first time
hi
yes connect the idle control up it would make a difference and also try and play with your start prime pulse on your settings ive found that sometimes if there is to much feul when crancking it takes longer to start
yes connect the idle control up it would make a difference and also try and play with your start prime pulse on your settings ive found that sometimes if there is to much feul when crancking it takes longer to start
-
- LR 4WD Full Lockers
- Posts: 601
- Joined: Thu Jan 24, 2008 10:31 pm
- Town: Gordons Bay
- Vehicle: 2011 Hilux DC 3.0 D4D
- Real Name: Luke
Re: How to Get 1uzfe to start first time
Just a stupid question, i have the idle control, just not the idle control plug. Could i make one up? And can someone tell me where to plug into in the ECU, im using the Spitronics Venus ECU with EMU computer for autobox. I do have the spitronics wiring diagrams but unsure which one to use. Any help would be much appreciated.
With each replacement of parts, a car slowly becomes Chinese.
- Kaspaas
- LR4WD, Lockers, Crawler Gears
- Posts: 1270
- Joined: Fri Jul 25, 2008 9:39 am
- Town: Wellington
- Vehicle: 1998 Land Cruiser 105series GX
- Real Name: Cobus
- Location: Wellington
Re: How to Get 1uzfe to start first time
Long time no see Luke!
How did the conversion go??
How did the conversion go??
1998 Toyota land Cruiser 105 series. 4.2 D
"I am human, I make mistakes, and that is okay, I have my own permission."
"I am human, I make mistakes, and that is okay, I have my own permission."
-
- LR 4WD Full Lockers
- Posts: 601
- Joined: Thu Jan 24, 2008 10:31 pm
- Town: Gordons Bay
- Vehicle: 2011 Hilux DC 3.0 D4D
- Real Name: Luke
Re: How to Get 1uzfe to start first time
Hey Kaspaas
Yup it has been about 3 or 4 years since i sold my old hilux with the 7mge. I just bought a 1987 SFA double cab with a lexus v8 2 months ago, so ust getting her shipshape. I want to put some piccies up actually. Must just work out how to sync my iphone to windows to upload. Anyways it good to be back on the forum again.
Yup it has been about 3 or 4 years since i sold my old hilux with the 7mge. I just bought a 1987 SFA double cab with a lexus v8 2 months ago, so ust getting her shipshape. I want to put some piccies up actually. Must just work out how to sync my iphone to windows to upload. Anyways it good to be back on the forum again.
With each replacement of parts, a car slowly becomes Chinese.
-
- LR 4WD Full Lockers
- Posts: 601
- Joined: Thu Jan 24, 2008 10:31 pm
- Town: Gordons Bay
- Vehicle: 2011 Hilux DC 3.0 D4D
- Real Name: Luke
Re: How to Get 1uzfe to start first time
Ok so i just figured out how to post images. So heres pics of my new old truck.
Last edited by Mud Dog on Wed May 06, 2015 7:49 pm, edited 1 time in total.
Reason: Images resized - were not showing.
Reason: Images resized - were not showing.
With each replacement of parts, a car slowly becomes Chinese.
- Kaspaas
- LR4WD, Lockers, Crawler Gears
- Posts: 1270
- Joined: Fri Jul 25, 2008 9:39 am
- Town: Wellington
- Vehicle: 1998 Land Cruiser 105series GX
- Real Name: Cobus
- Location: Wellington
Re: How to Get 1uzfe to start first time
Nice truck!!
Is that a ex-forum member's Lux?
I did a total rebuilt of my 7M two years back, and I'm more pleased than ever.
In hind sight I could have done a 1UZ conversion for way less moola, (to rebuild a 7M back to standard is m#@r expensive!)
Searched for 6 months to find a crank that has not been cut for example.
(PS: @ R1100 per piston from Toyota is crazy! )
Enjoy the V8, glad to have a old face back!!
Is that a ex-forum member's Lux?
I did a total rebuilt of my 7M two years back, and I'm more pleased than ever.
In hind sight I could have done a 1UZ conversion for way less moola, (to rebuild a 7M back to standard is m#@r expensive!)
Searched for 6 months to find a crank that has not been cut for example.
(PS: @ R1100 per piston from Toyota is crazy! )
Enjoy the V8, glad to have a old face back!!
1998 Toyota land Cruiser 105 series. 4.2 D
"I am human, I make mistakes, and that is okay, I have my own permission."
"I am human, I make mistakes, and that is okay, I have my own permission."