7mge conversion

[shaunk]

Hi Guys,

i am busy with a 4y/7mge consversion . I have the complete motor,autobox,wiring and ECU from a cressida.

Anybody got info on using the autobox and converting it to 4x4.

Thanks
Shauk

[DOELLOOS]

Ek kry die gevoel dat Bennie enige oomblik nou iets hier gaan se...

[BenHur]

Praat met Fana (conversion man) hy het pas een vir 'n klient gedoen

[DOELLOOS]

Sien, ek is met die helm gebore...

:wth:

[Spartan]

I have the complete motor,autobox,wiring and ECU from a cressida.

Nou hoekom gebruik jy nie jou bakkie se manuel box net so nie

[BenHur]

I have the complete motor,autobox,wiring and ECU from a cressida.

Nou hoekom gebruik jy nie jou bakkie se manuel box net so nie

Yes then sell the autobox and bellhousing to me.

[Spartan]

Yes then sell the autobox and bellhousing to me.

[shaunk]

How do i get hold of Fanie,what area is he in .Cape Town i hope!

[BenHur]

PM Fana (conversion man), sorry he is in PTA

[shaunk]

Thanks Guys,
The correct box is a Toyota a340F .Also used in the Jeeps as a AW4 Gearbox as well as Isuzu V6 and Mitsubishi.
Now who knows where i can get one.

Thanks Shaunk

[Spartan]

Ja en die manual een is n R154 box of die jumbo box soos die manne hom noem :Geek:

[Toybox]

Hmmm, both auto boxes' I've had on the Lex's were 341e's. AFAIK they're almost identical to the 340. At first glance its only the 1st gear ration that differs.

The 340 has a 1st ratio of 2.531 and the 340 a 1st ratio of 2.804.

My guess would be that their bellhousing patterns are identical too...

[Spartan]

My guess would be that their bellhousing patterns are identical too...

Net aan die engine kant

[BenHur]

My guess would be that their bellhousing patterns are identical too...

Net aan die engine kant

What do you mean I will be able to bolt a Lex autobox onto the 7M then?

Jaco

Julle het nie dalk 'n autobox vir die 7M wat daar rondlê wat julle hierdie kant toe wil gooi nie?

[Toybox]

Bennie that would be my guess.

You'd just have to look into the ratio in first and see if its suitable for the 7m. Also, you of course have to go with the transfer adapter or Prado transfer...

[Spartan]

Julle het nie dalk 'n autobox vir die 7M wat daar rondlê wat julle hierdie kant toe wil gooi nie?

Nee Benna het nog altyd sonder die auto box gekoop maar daar by MYM in Alrode verkoop hulle daai boxe vir onder n R1000 as hulle het, infact ek dink jy kan x2 kry vir 1000 bokke. Ek self was baie lanklaas daar.

[BenHur]

Julle het nie dalk 'n autobox vir die 7M wat daar rondlê wat julle hierdie kant toe wil gooi nie?

Nee Benna het nog altyd sonder die auto box gekoop maar daar by MYM in Alrode verkoop hulle daai boxe vir onder n R1000 as hulle het, infact ek dink jy kan x2 kry vir 1000 bokke. Ek self was baie lanklaas daar.

Ja maar gaan dit pas op my mouter :? :? :?

[Spartan]

Ja maar gaan dit pas op my mouter

As dit n 7M is sal hy pas

[Gunta]

I have done this conversion over 5 years ago with varsity fees. Keep to the manual gearbox you have in there. Get a bell housing to fit and dont buy these cheap nasties. If you cant get an orriginal get one from Toyota or you will be sorry. I am running an aftermarket ecu (Dictator). Apparantly if you have the cressida ecu and airflow meter you will get a better fuel consumption. Check with other guys who have the standard ecu. I get 5.5 - 6km/l and I think they get over 7. I also think the 7m from the supra has more torque because of the length of the inlet manifold. Great conversion and good luck. If you need any questions answered let me know.