Hilux 4x4 Forum

Scott

Martin my Kzte became difficult to start and on inspection pump bolts were loose and timing moved did adjust and it starts much easier but still not 100% but I am in northmead so it is around the corner if you want me to show you what I mean.

Scott

I am in for the day.

Scott

also try engine importers as they do strip.If any one needs to borrow one I have a spare.

Scott

Tiaan the guys are fitting Vigo center portions to the SFA import diffs,I ran into a guy buying one for a V8 conversion that he was busy with the ratio's should be correct and you get diff lock with it.

Scott

it faces the pressure plate it should state on the clutch plate.

Scott

Well after reading all the comments No:1 in terms of reliability he can put his carb and manifold behind the seat and it can be swopped out in the bush.No:2 if not EFI ford v6 for the same fuel economy and dubble the power I had a 4Y = sh1t and then ran V6 now I have the V6 on the side because I wen...

Scott

I paid R1500 so if I can get my money back that will be good.

Scott

I have a Toyota 4y fuel injection manifold with injectors and a MR turbo computer box if interested.As far as I have read on the forum this improves power and fuel consumption.My mate is coming from Christiana tomorrow so give it some thought.I can send it back with him.

Scott

Congrats Niel you guys done well.The only thing we got was most distance covered due to being blown to the other side of the dam and being towed back by the speed boat but I am extremely proud of the Scouts at 4Th Benoni Air Scouts.Also a very young group and the raft held up without any issues and ...

Scott

plenty of firewood has someone got a chain saw ? or will there be a place to make a huge fire.Some of the oak logs are quite big.

Scott

Looks great it will just be swopped around for right hand drive.

Scott

Just give me a call I am in Thirteenth Ave Northmead one down from the square so give me a call and we can meet up.

Scott

It sounds good unless wheels fall off count me in.Although not sure what we must do.

Scott

Cassie I got you a inner and outer weather strip if you are interested.

Scott

George I used the Toyota 5L turbo pump and I did not get the rev counter to work.

Scott

I have bought vehicles with relatively low kilos and blown motors because people do not service them but if a motor is cared for most with good preventive maintenance will last a long time,new pipes all the way around,new radiator and not driving like an idiot goes a long way.

Scott

I have now fitted a KZTE motor to my SFA with maual pump.Question is can you put a gas analiser up the exust to check co2's and if so what will the recommended co2'S be.

Scott

thanx eric

Scott

Cassie give me a call have 2 x strips here and should have clips also going to JHB on Tuesday so I can go past the place for you.0845276369

Scott

Looks Good mate

Scott

I posted this on the forum a while ago:viewtopic.php?f=34&t=22443&p=267156&hil ... ip#p267156

Scott

Cassie how many are you looking for? should have some extras.There is also Worth shop on Elizabeth as you go over the N12 on the airport side.

Scott

i found them in JHB check link or search on the forum. viewtopic.php?f=34&t=22443&p=267156&hil ... ip#p267156" onclick="window.open(this.href);return false;

Scott

it sounds good will try and make it.

Scott

I am very interested to see what my Kzte is pushing.

Scott

pulled the sump of my kzte motor last week just lifted the whole front up with a engine crane.But mine is in a sfa.

Scott

Heard on 94.2 that a Magistrate cannot hear the case because there pension is tied up in e toll so it has to go to High court.??

Scott

Has anybody got extended front shackles for the front.Put Kzte in and the leafs are taking strain so need to make a plan to get it to JHB for them to fit new Leafs.

Scott

I have family in Botswana and my cousin has had a 4y in a hilux for many years as a work horse and does load it.The 4y will get you there but on long uphills it does slow you down.If you have the patience the 4y or 2L(2.4 diesel)are the best.

Scott

Thanks for the advice Hoppy.Will look at that angle.

Scott

Zepplin the angle grinder is scared of the 4 pound hammer at the moment.

Scott

Motor is in but not sitting happy on the engine mountings has anybody got any advice as to which mountings to use.

Scott

I am prepairing my kzte for my SFA I did start it last weekend and sounds great but will only know once in.
As to manual pumps I used to play with my KB 280 pump and it could really run.Maybe even better than the KB 300(electronic pump).

Scott

Datsun 1200 1973 Paid R3000 and had it for years then sold it for what I paid.

Scott

Johann what radiator does it have in at the moment?.I can give you some tips on eletric fan mods call me on zero84five276369.

Scott

I have the ford 3L V6 at the moment and power is there but I have just got my hands on a KZTE motor with a 5L pump.Has anybody done the conversion onto the SFA?

Scott

well done to sixth.Hope to challenge next year.Too many below cut off age this year but group next year should be different.So lets hope all of Benoni groups are going down the Vaal next year.

Scott

I am in Northmead so send me your number and I'll give you a call and we can arrange it.My number 084 527 6369

Scott

Johno I have paid so please check if you have got it.

Scott

Was it a company vehicle before as the fit strange limiters for speed and revs ?

Scott

Have Paid please check your account and it is for a SFA and will collect.

Scott

Very nice

Scott

I used firestone atx for years and know of tyre distrbutors that used them, far as I am concerned give them a chance.

Scott

locktite agreed

Scott

Johno I will take a kit for SFA 1988 Import diffs.I will collect as I am also in Benoni so let me Know when.

Scott

There is always the upside in having a 4x4 that is not 100% tidy in that you can push it off road to the limit and not worry about scratching it.So get out there and have some fun.

Scott

got most of it so problby R500 and a bottle of brandy or two for my mates help and supplying the golf downer parts.

Scott

Golf one single injection bolts to the intake manifold and fits in place of the Webber 0nly the four bolt holes need to be enlarged to 8mm. modify dissy to hole sensor make it six hole parts from golf dissy.Buy golf one TP100 harness +-R150+TP100 now connect up and the dissy will send the pulse to t...

Scott

All electronic components have a little bit of smoke in them to work.When the smoke is out they stop working.

Scott

Busy fitting golf one fuel injection and converting the disy to electronic this should hopefully drop fuel consumption.

Scott

looks good now all you need to do is incorporate the high lift and it is all sorted.

Scott

Hennie if you can also send me the webber manual I'll appreciate it rwscott@absamail.co.za

Scott

It sounds good

Scott

Welcome

Scott

Bought the leads for R80 they are copper wire cheap will see if they last and will put the old ones behind the seat.

Scott

I own a small company called Phone Fundies

Telecommunications/CCTV/Paging Systems/IT infer structure etc...well what ever makes money without facing time or sleepless nights.
Hopefully join my dad in Toti and try the profession of beach bum 600km too far at time.

Scott

I should have a spare carb soon and then I will start playing with jets and Imultion tubes.Let you know what the outcome will be.

Scott

Lehan as ek jy was sal ek eers bietjie speel met die lux want ek het tot dis ver geen probleeme opgetel met myne op sy oorspronklike plek.(my spelling ??)

Scott

I it is pitty he is not busy with the old steed in in his pic.

Scott

What happened to the old Ridge pole tent besides being packed away damp.??

Search found 331 matches