Hilux 4x4 Forum

okay so there's definitely no valve and there is no cable there is also no join in the pipe

the pipe was not blocked off all they did was put a join in so the water flowed between the 2 pipes



Sent from my SM-A307FN using Tapatalk

when you say heater valve is there a valve the cuts the water flow. because I definitely don't have that it's just got the flap inside that blocks the heater core.


Sent from my SM-A307FN using Tapatalk

I have a 3rz the heater core was not connected sorted the cores hole out but now its like it gets a air lock when I remove the pipe its like it's not pumping water to it pipe are not blocked any help will be appreciated. seems to build up seem in the pipes.

Sent from my SM-A307FN using Tapatalk

This morning when I left for work there was a loud sounds from under the dash on my 1999 2.7 4x4 and then a spring and it's other half fell down onto my feet I know it's one of the return springs on one of the pedals but not sure which one as I see the brake and the clutch doesn't have now. so not s...

I have one I just was hoping for a oil seal size so I can get it all one in a day

Sent from my SM-A307FN using Tapatalk

I just want to find out that is the dimensions of the oil seal on the front diff to the side shaft it's 1999 2.7 as well as from the transfer case to front propshaft. thanks in advance

Sent from my SM-A307FN using Tapatalk

thanks makes sense

Sent from my SM-A307FN using Tapatalk

I have the same question did you come right with it or not yet

Sent from my SM-A307FN using Tapatalk

I was wondering if there's a way to make my 1999 hilux windows automatic (hands free) when opening and closing on all windows is this possible and if so how?

Sent from my SM-A307FN using Tapatalk

I want to find out which is better amd more worth while to rebuild my current 3rz or to buy a Japanese cutout.

if so whats there to look for in both

Sent from my SM-A307FN using Tapatalk

how much should I look at for a engine complete

Sent from my SM-A307FN using Tapatalk

so I cleaned the whole intake but now it ideals at 1100rpm

Sent from my SM-A307FN using Tapatalk

the main butterfly valve

I went through the fuel lines today nothing leaking anywhere.

I am going to replace my maf and in the summer rebuild the whole engine so not going to pull the head just yet but it is a possibility.

I will have a look tomorrow I was trying to test my maf today and well I think I found the problem the voltage stays the same no matter what as well as according to the specs I found its out even at ideal

I used to get around 16

if you have any other suggestions on what else I can check

I am very sure I put in 22 liters in town and drove till it ran out then I put in 22 liters and drove till it ran out on open road

my fuel consumption is around 22L to the 100km town driving and about 18 to 16 on open road depending on my foot

the engine has 500000km on the clock not been open I did a compression test as she is heavy on fuel and it was just above 600kpa I know it will need rings as well as has a slight knock on one of the bearings.

I have a 1999 3rz hilux 4x4 I was wondering I will be needing to rebuild the engine. but it got me thinking how difficult is it to put the kzte in place of the 2.7 what needs doing and so on or do I stick to the 2.7