Hilux 4x4 Forum

Not sure what the clock is but if cleaning the MAF helped thats great news. If you still do get a code pulling up a hill at around 3000rpm then try swopping those vacuum hoses around.

Sent from my SM-A336E using Tapatalk

So mine was just the two vacuum hoses that had been swopped around. Not the easiest solenoid to get to as its right at the back of the motor below the EGR valve but worth a try! The car pulled better and had no more code. https://uploads.tapatalk-cdn.com/20230525/7a6fd6658611083dca215bd9b0022d40.jpg...

https://youtu.be/dowUX8pEjR0.

Sent from my SM-A336E using Tapatalk

Hi. Yes i did. After replacing the MAF sensor and the solenoid i eventually found a video on youtube showing how the solenoid opens the swirl control flaps and the two vacuum pipes on the solenoid were the wrong way around. I just swopped them around and all good now. My car only started giving code...

Hi. I know this is an old post but did you come right or does anyone know the issue. I have swopped out the stepper motor, swopped out the Turbo control module, new map sensor, new maf sensor. Car drives mostly fine but sets 0045 code sometimes when cold. Boost is normal at 0.9 bar. Wiring seems ok....

Ok great thanks very much. Will check out all options. I really like the 1.3 boost but also worried it might damage the motor or turbo.

Sent from my SM-A336E using Tapatalk

Hi. I am not sure if this is a problem someone has had before, but i am just looking for some advice. My 2010 1kd Hilux with 285000km runs great with no problems except i feel it could do with a bit more power. This is where i feel like there is a problem with the actual turbo. I get around 0.9 bar ...

So If anyone is interested the latest price from Toyota is R3800. Rediculous for 4 rubber seals. Will keep looking.

Sent from my SM-A315F using Tapatalk

Ok Thanks. Will ask them for the latest price as i would like to keep them standard!

Sent from my SM-A315F using Tapatalk

Great thanks. Ill check them out. [emoji106]

Sent from my SM-A315F using Tapatalk

Anyone know where i can get new door weather strips for my 2010 Hilux D/C. The window seals on the outside of the doors. Anywhere but agents! Think the part numbers are:
68160C RH front
68210C LH front
68163H RH Rear
68164A LH Rear

Sent from my SM-A315F using Tapatalk

Thanks again Mud Dog. Post was helpful but still did not help me solve my problem. I have fitted a new MAF sensor as it was not giving the correct readings. It has helped slightly with performance but still get the fault code P2008 when pulling up hill at 3000rpm. The MAP sensor tests fine. The only...

Thanks Mud Dog. Will look into that. [emoji106]

Sent from my MAR-LX1M using Tapatalk

Hi. Is there someone that might be able to help diagnose the problem im having with my 2010 1KD Hilux d4d. The vehicle goes into limp mode when im loaded and driving up a hill. As soon as i get to about 3000rpm. A fault code comes up as P2008. Inlet Runner control circuit bank 1 fault. I have remove...

Yes 100% correct. I changed mine on my 2010 Hilux. A word of advise loosen the old ones with the engine hot. Tip i got from a mechanic and worked wonders. They can break very easily as i found out trying to do on a cold engine.

Sent from my MAR-LX1M using Tapatalk