Load tray storage build
- Thelynxeffect
- High Range 2WD
- Posts: 16
- Joined: Fri Apr 05, 2013 2:23 pm
- Town: Nanyuki
- Vehicle: 2013 Hilux DC
- Real Name: Henry
- Location: Kenya
Load tray storage build
So today I started my (basic) load tray storage build, I got some guys at the side of the road to do the welding for me as engineering firms are in short supply where I am located.
I have used 1" steel square bar, which is much lighter than I expected, for the frame, that in turn will support 9mm block board on the deck which I will cover with rubber matting.
You will notice that the storage is in three areas, this should allow it to be modular should the need arise to carry a tall load. I have just finished priming the steelwork and have ordered some full extension drawer slides for the front two boxes, they are only 650mm deep but I think it still warrants drawers.
Tomorrow I shall cut the wood and mount it to the frame.
Sent from my iPhone using Tapatalk
I have used 1" steel square bar, which is much lighter than I expected, for the frame, that in turn will support 9mm block board on the deck which I will cover with rubber matting.
You will notice that the storage is in three areas, this should allow it to be modular should the need arise to carry a tall load. I have just finished priming the steelwork and have ordered some full extension drawer slides for the front two boxes, they are only 650mm deep but I think it still warrants drawers.
Tomorrow I shall cut the wood and mount it to the frame.
Sent from my iPhone using Tapatalk
Kenya provides many reasons to live here, Toyota customer service however isn't on that list.
2013 Toyota Hilux 2.5 DC, MCC Bull bar, Samurai 8000 sythetic rope winch, Homemade drawer system, Bushtech Canopy (on order), Capriva seat covers etc...
- 4x4Grant
- LR 4WD Rear Locker
- Posts: 263
- Joined: Thu Mar 27, 2014 7:41 am
- Town: Scottburgh
- Vehicle: Hilux KZTE
- Real Name: Grant
Re: Load tray storage build
Looks good. Look forward to seeing the finished product
Schools don't need all them number calculatin' classes.
The only math folks need to know is
4 x 4 = Off-Road
The only math folks need to know is
4 x 4 = Off-Road
- Obelix and Dogmatix
- LR4WD, Lockers, Crawler Gears
- Posts: 1837
- Joined: Sun Nov 17, 2013 5:27 pm
- Town: ROODEPOORT
- Vehicle: HILUX 4.0 V6 4x4 named Obelix, donated to some clown, HILUX 4.0 V6 4x4 named Obelix II Onca front and rear Amade extreme Suspension and under water breathing apparatus
- Real Name: Quentin
- Location: Allens Nek
Re: Load tray storage build
Not sure how your tray sitting in the back will be accessed even with sliders? :?
But good luck with it and prove me wrong.
PS hurry up so that I can learn from your _ _ _ great idea's
But good luck with it and prove me wrong.
PS hurry up so that I can learn from your _ _ _ great idea's
Rules are there to make you think before you break them!!!
God made man before
woman so as to give him time
to think of an answer
for her first question.
COMMON SENCE IS NOT A GIFT, IT IS A PUNISHMENT!! BECAUSE YOU HAVE TO DEAL WITH EVERYONE WHO DOES NOT HAVE IT!!!
God made man before
woman so as to give him time
to think of an answer
for her first question.
COMMON SENCE IS NOT A GIFT, IT IS A PUNISHMENT!! BECAUSE YOU HAVE TO DEAL WITH EVERYONE WHO DOES NOT HAVE IT!!!
- Thelynxeffect
- High Range 2WD
- Posts: 16
- Joined: Fri Apr 05, 2013 2:23 pm
- Town: Nanyuki
- Vehicle: 2013 Hilux DC
- Real Name: Henry
- Location: Kenya
Re: Load tray storage build
Access to the back box will be through a hinged lid on the top, it will contain a water tank and battery and bed rolls so will not be opened too often, because I wanted a modular system I had to sacrifice easy access to the back box.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Kenya provides many reasons to live here, Toyota customer service however isn't on that list.
2013 Toyota Hilux 2.5 DC, MCC Bull bar, Samurai 8000 sythetic rope winch, Homemade drawer system, Bushtech Canopy (on order), Capriva seat covers etc...
- Thelynxeffect
- High Range 2WD
- Posts: 16
- Joined: Fri Apr 05, 2013 2:23 pm
- Town: Nanyuki
- Vehicle: 2013 Hilux DC
- Real Name: Henry
- Location: Kenya
Re: Load tray storage build
Also the longest sliders I can get delivered here would be 900mm, so they wouldn't be long enough anyway.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Kenya provides many reasons to live here, Toyota customer service however isn't on that list.
2013 Toyota Hilux 2.5 DC, MCC Bull bar, Samurai 8000 sythetic rope winch, Homemade drawer system, Bushtech Canopy (on order), Capriva seat covers etc...
- yotaman
- LR 4WD Full Lockers
- Posts: 566
- Joined: Sat Nov 21, 2009 1:50 pm
- Town: Hartenbos Western Cape
- Vehicle: '99 2.7i Hilux 4x4 S/C
- Real Name: Shane
Re: Load tray storage build
I like the modular approach and will certainly keep an eye on your progress Henry. What ideas do you have for securing the various modules and for easy removal from the load bin?
Imagination is more important than knowledge. Knowledge is limited, imagination encircles the world.
Albert Einstein
Albert Einstein
- Thelynxeffect
- High Range 2WD
- Posts: 16
- Joined: Fri Apr 05, 2013 2:23 pm
- Town: Nanyuki
- Vehicle: 2013 Hilux DC
- Real Name: Henry
- Location: Kenya
Re: Load tray storage build
I am thinking about slotted rails mounted to the load tray base so I could re-configure as required, it seems the most adaptable solution, also means I can secure heavy loads in the tray if I also get some load rings that slot in.
Just need to see if I can find any here in Nanyuki.
Time to start varnishing before it rains [UMBRELLA WITH RAIN DROPS]️
Sent from my iPhone using Tapatalk
Just need to see if I can find any here in Nanyuki.
Time to start varnishing before it rains [UMBRELLA WITH RAIN DROPS]️
Sent from my iPhone using Tapatalk
Kenya provides many reasons to live here, Toyota customer service however isn't on that list.
2013 Toyota Hilux 2.5 DC, MCC Bull bar, Samurai 8000 sythetic rope winch, Homemade drawer system, Bushtech Canopy (on order), Capriva seat covers etc...
- carlo4e
- Low Range 4WD
- Posts: 123
- Joined: Thu Jan 02, 2014 6:24 pm
- Town: Groblersdal
- Vehicle: Hilux V6
- Real Name: Carlo
Re: Load tray storage build
This looks amazing and well thought out. Long weekend coming up...
私のハイラックスが大好きです
- Thelynxeffect
- High Range 2WD
- Posts: 16
- Joined: Fri Apr 05, 2013 2:23 pm
- Town: Nanyuki
- Vehicle: 2013 Hilux DC
- Real Name: Henry
- Location: Kenya
Re: Load tray storage build
After abandoning my previous build I have started a new design.
Test fitting after mock up
[img]http://tapatalk.imageshack.co/v2/14/10/ ... a14547.jpg[/img]
[img]http://tapatalk.imageshack.com/v2/14/10 ... b206be.jpg[/img]
After glueing and sealing, ready for fitting out.
[img]http://tapatalk.imageshack.com/v2/14/10 ... abb43c.jpg[/img]
It will have one large drawer on full extension 1300mm runners, a small vertical drawer on the right for my booze cabin at and a battery box, inverter and air pump at the back behind the fridge .
Test fitting after mock up
[img]http://tapatalk.imageshack.co/v2/14/10/ ... a14547.jpg[/img]
[img]http://tapatalk.imageshack.com/v2/14/10 ... b206be.jpg[/img]
After glueing and sealing, ready for fitting out.
[img]http://tapatalk.imageshack.com/v2/14/10 ... abb43c.jpg[/img]
It will have one large drawer on full extension 1300mm runners, a small vertical drawer on the right for my booze cabin at and a battery box, inverter and air pump at the back behind the fridge .
Kenya provides many reasons to live here, Toyota customer service however isn't on that list.
2013 Toyota Hilux 2.5 DC, MCC Bull bar, Samurai 8000 sythetic rope winch, Homemade drawer system, Bushtech Canopy (on order), Capriva seat covers etc...
- Thelynxeffect
- High Range 2WD
- Posts: 16
- Joined: Fri Apr 05, 2013 2:23 pm
- Town: Nanyuki
- Vehicle: 2013 Hilux DC
- Real Name: Henry
- Location: Kenya
Re: Load tray storage build
After abandoning my previous build I have started a new design.
Test fitting after mock up
[img]http://tapatalk.imageshack.co/v2/14/10/ ... a14547.jpg[/img]
[img]http://tapatalk.imageshack.com/v2/14/10 ... b206be.jpg[/img]
After glueing and sealing, ready for fitting out.
[img]http://tapatalk.imageshack.com/v2/14/10 ... abb43c.jpg[/img]
It will have one large drawer on full extension 1300mm runners, a small vertical drawer on the right for my booze cabin at and a battery box, inverter and air pump at the back behind the fridge .
Test fitting after mock up
[img]http://tapatalk.imageshack.co/v2/14/10/ ... a14547.jpg[/img]
[img]http://tapatalk.imageshack.com/v2/14/10 ... b206be.jpg[/img]
After glueing and sealing, ready for fitting out.
[img]http://tapatalk.imageshack.com/v2/14/10 ... abb43c.jpg[/img]
It will have one large drawer on full extension 1300mm runners, a small vertical drawer on the right for my booze cabin at and a battery box, inverter and air pump at the back behind the fridge .
Kenya provides many reasons to live here, Toyota customer service however isn't on that list.
2013 Toyota Hilux 2.5 DC, MCC Bull bar, Samurai 8000 sythetic rope winch, Homemade drawer system, Bushtech Canopy (on order), Capriva seat covers etc...